RETRACTED: Analytical investigation of squeezing unsteady nanofluid flow between parallel plates by LSM and CM

Numerical optimization of microchannel heat sink (MCHS) performance cooled by KKL based nanofluids in saturated porous medium

“…Only water based nanofluids are considered in the current study. For Al 2 O 3 -water and Cu-water nanofluids, this function follows the format: f (T, φ, dp) = b 1 + b 2 ln(dp) + b 3 ln(φ) + b 4 ln(φ)ln(dp) + b 5 ln (dp) 2 ln(T) + b 6 + b 7 ln(dp) + b 8 ln(φ) + b 9 ln(φ)ln(dp) + b 10 ln (dp) 2 φ ≤ 0.04, 300 K ≤ T ≤ 325 K (10) With decent coefficients b i (i = 1-10), the Al 2 O 3 -water nanofluids and CuO-water nanofluids have a R 2 of 96% and 98%, respectively shown in [58] is written as follows:…”

“…Several studies have been performed on prediction of thermal conductivity of nanofluids [3][4][5][6]. Various studies to predict the effect of nanofluid on heat transfer rate have been presented by [7][8][9][10].…”

Heat and mass transfer on MHD nanofluid flow past a vertical porous plate in a rotating system

“…It has been found that the presence of nanoparticles within the fluid can appreciably increase the effective thermal conductivity of the fluid and, as a consequence, enhance the heat transfer characteristics. An excellent collection of articles on this topic can be found in the book Das et al (2007) and in the review papers (Xu et al, 2013;Trisaksri and Wongwises, 2009;Kakac and Pramuanjaroenkij, 2009;Soleimani et al, 2012;Fakour, 2014;Nield and Kuznetsov, 2014;Das, 2014;Pourmehran, 2015;Ramesh, 2016).…”

Heat and Mass Transfer on Squeezing Unsteady MHD Nanofluid Flow between Parallel Plates with Slip Velocity Effect

“…The flow analysis between two parallel plates of Cu-water squeezing nanofluid was investigated by Domairry and Hatami [2]. Pourmehran et al [3] studied the unsteady flow of squeezing nanofluid between parallel plates. Gupta and Ray [4] proposed a problem of unsteady flow of a squeezing nanofluid between two parallel plates.…”