Retentive Force of Glass-Ceramic Soldered Customized Zirconia Abutment Copings with Prefabricated Titanium Bases

Hey, Jeremias; Kasaliyska, Monika; Kiesow, Andreas; Schweyen, Ramona; Arnold, Christin

doi:10.3390/ma13143193

Cited by 5 publications

(1 citation statement)

References 33 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The specimens were then aged using a thermocycling machine made speci cally for the purpose (Dental biomaterials Department, Alexandria University, Egypt) for 2000 cycles, or 3 months of clinical service, in water baths between 5 and 55 degrees Celsius with dwell times of 1 minute in each bath and relaxation periods of 30 seconds in air between the 2 baths. 20 The specimens were subsequently secured to a specially designed cyclic loading apparatus (Dental biomaterials Department, Alexandria University, Egypt) and loaded with an average functional masticatory force of 50 N over a mean of 120 000 cycles. 21 After aging, the stereomicroscope was used again to evaluate the effect of thermocycling and cyclic loading on the marginal adaptation for both groups.…”

Section: Methodsmentioning

confidence: 99%

Evaluation of the masking ability, marginal adaptation, and fracture resistance of screw-retained lithium disilicate implant-supported crowns cemented to titanium bases versus preparable abutments

Kordi

Ibrahim

Metwally

et al. 2023

Preprint

View full text Add to dashboard Cite

Background. Straight preparable abutments and titanium bases (ti-base) can be used to support single-unit screw-retained lithium disilicate implant-supported restorations. The choice between using both abutments depends on many factors. Some of which like the masking ability, marginal adaptation, and fracture resistance of the lithium disilicate restorations on both abutments has not been determined. The purpose of this in vitro study was to compare the masking ability, marginal adaptation, and fracture resistance of screw-retained lithium disilicate implant-supported crowns cemented to straight preparable abutments and ti-bases. Methods. Twenty laboratory implant analogs (Straumann Bone Level; Straumann AG) were randomly divided into 2 groups (n = 10 each) according to the type of the abutment used. Preparable abutment group and CEREC ti-base group. Lithium disilicate crowns were used to restore the specimens. All specimens were subjected to thermocycling (from 5 °C to 55 °C for 2000 cycles) followed by cyclic loading (120 000 cycles). The vertical marginal gap between the abutment finish line and the most apical part of the crown was measured in (µm) by using a stereomicroscope after cementation and after thermocycling and cyclic loading. A spectrophotometer was used to evaluate the masking ability of the specimens after cementation. The load required to fracture the crowns was measured in Newtons (N) by using a universal testing machine after thermocycling and cyclic loading. The Shapiro-Wilk test of normality was used. Comparison between the study groups evaluating the masking ability and fracture resistance was done using independent samples t-test. Significance was set at P < .05. Comparison between the 2 study groups evaluating the marginal adaptation was done by using Mann-Whitney U test. Results. Regarding the masking ability, the color difference (∆E) showed no statistically significant difference between the CEREC group (2.6 ± 0.2) and the preparable abutment group (2.6 ± 0.3) (P = .888). The average of the microgap values (µm) was greater in CEREC group after cementation (13.9 ± 9.2) than preparable group (7.63 ± 1.78) with no statistically significant difference between the 2 groups (P = .49). After cyclic loading and thermocycling, the average microgap values (µm) was significantly greater in the CEREC group (21.3 ± 7.4) than in preparable group (13.3 ± 1.5) (P = .02). The load required to fracture the specimens was greater in the preparable group (1671.5 ± 143.8) than in the CEREC group (1550.2 ± 157.5) with no statistically significant difference between the 2 groups (P = .089). Conclusion. The abutments used in the present study did not compromise the masking ability of the screw-retained lithium disilicate implant supported crowns. Moreover, the crowns cemented to preparable abutments had better marginal adaptation and higher fracture resistance when compared to those cemented to CEREC ti-bases.

show abstract

Section: Methodsmentioning

confidence: 99%