Research Progress of Low Density and High Stiffness of Be-Al Alloy Fabricated by Investment Casting

Abstract

Be-Al alloy is a type of in situ metal matrix composite composed of a primary Be phase for strength and stiffness and a continuous Al matrix for ductility and toughness. Be-Al alloy (AlBe-Cast®910) has the characteristics of low density (2.17 g/cm3), high elastic modulus (193 GPa) and specific stiffness (88.94 GPa/(g/cm3)) as a preferred material for lightweight aerospace products. Investment casting technology can be employed to prepare the components with thin-walled complex structures for aerospace; however, the wide solidification range for Be-Al leads to difficulty in feeding a casting and results in extensive shrinkage and porosity in cast parts. In this paper, the characteristics of Be-Al alloy are introduced first. Secondly, the mechanisms of influence of adding elements on the casting process, mechanical properties (strength increases more than 20% by adding elements) and microstructure evolution are explained in detail. In addition, the heat treatment technology (strength increases at least 10% after heat treatment) and the repair of defects by electron beam welding are discussed. Finally, Be-Al alloy is a new type of composite material, and China is a major research and application country; this paper introduces its research status and analyzes existing problems and shortcomings and points out the direction of Be-Al alloy development in China in the next few years.

Light Alloys and Their Applications

“…The Be-Al alloy is the preferred material for use in lightweight aerospace products. Li et al [9] firstly introduced the characteristics of the Be-Al alloy and then presented details of the mechanism of the effect of added elements on the casting process, mechanical properties and tissue evolution. Finally, the heat treatment technology and the repair of defects via electron beam welding were also demonstrated.…”