Research on the Identification Method of Overhead Transmission Line Breeze Vibration Broken Strands Based on VMD−SSA−SVM

Abstract

For the problem of overhead line broken strand identification, a VMD−SSA−SVM-based overhead transmission line broken strand identification method is proposed. First, the vibration acceleration response signal of overhead transmission line under breeze environment was simulated by Ansys simulation software. Then the variable modal decomposition of the vibration acceleration response of the transmission line is performed to obtain the intrinsic mode function corresponding to the vibration behavior of the transmission line. The Hilbert transform is used to analyze the intrinsic mode functions of each order, and the Hilbert spectrum and marginal spectrum of the intrinsic mode functions of each order are studied to extract the first six order intrinsic frequencies. Each set of intrinsic frequencies is input as a feature vector into a support vector machine optimized by the sparrow search algorithm for training to achieve the identification of broken strands in overhead transmission lines. This paper studies the inherent frequency changes and identification results of overhead transmission lines under two states of normal operation and broken 5 strands operation, and the test results show that the identification method based on VMD-SSA-SVM has good identification effect on broken strands of overhead lines.

A novel ensemble deep reinforcement learning model for short‐term load forecasting based on Q‐learning dynamic model selection

“…2 (11) where RMSE VMD−LSTM (X i (t )) is the RMSE of the VMD-LSTM model. LSTM network solves the problem that RNN networks are prone to gradient vanishing and explosion in the training phase.…”

“…Dai et al designed a load forecasting model based on a support vector machine (SVM), solved the local minima problem, and had better generalisation ability [10]. Dudek et al apply the random forest in STLF [11]. However, prediction accuracy is low when the power load fluctuates wildly.…”

“…Dudek et al. apply the random forest in STLF [11]. However, prediction accuracy is low when the power load fluctuates wildly.…”

“…FIGURE11 Weekly load forecasts of sub-models, corresponding baseline models, and all baseline ensemble models.…”

A Novel Defect Detection Method for Overhead Ground Wire

“…The axial tension of the overhead ground wire structure will have a large stress concentration at the defects’ places. If the defects cannot be found and repaired in time, it will eventually lead to the fracture and fall of the overhead ground wire, resulting in great economic loss and serious electric accidents [ 4 , 5 , 6 ].…”