Research on Photoacoustic Synthetic Aperture Focusing Technology Imaging Method of Internal Defects in Cylindrical Components

Abstract

Cylindrical components are parts with curved surfaces, and their high-precision defect testing is of great significance to industrial production. This paper proposes a noncontact internal defect imaging method for cylindrical components, and an automatic photoacoustic testing platform is built. A synthetic aperture focusing technology in the polar coordinate system based on laser ultrasonic (LU-pSAFT) is established, and the relationship between the imaging quality and position of discrete points is analyzed. In order to verify the validity of this method, small holes of Φ0.5 mm in the aluminum alloy rod are tested. During the imaging process, since a variety of waveforms can be excited by the pulsed laser synchronously, the masked longitudinal waves reflected by small holes need to be filtered and windowed to achieve high-quality imaging. In addition, the influence of ultrasonic beam angle and signal array spacing on imaging quality is analyzed. The results show that the method can accurately present the outline of the small hole, the circumferential resolution of the small hole is less than 1° and the dimensional accuracy and position error are less than 0.1 mm.

Research on the 3D Reverse Time Migration Technique for Internal Defects Imaging and Sensor Settings of Pressure Pipelines

“…Conventional ultrasonic methods of pipeline testing encompass the Total Focusing Method (TFM) [23][24][25], the Synthetic Aperture Focusing Technique (SAFT) [26][27][28], and Time of Flight Diffraction (TOFD) [29][30][31]. There are pros and cons to each method.…”