Research on Optimization Design of Geometric Parameters of a Novel Frame-Embedded Track (NFET)

Abstract

A novel frame-embedded track (NFET) with additional beams between the prefabricated rail seats before was proposed, but its geometric parameters need to be further optimized, in order to solve the problem of difficulty in adjustment, due to the independence of the two prefabricated rail seats during the construction of tram. Based on the finite element method, the geometric parameters of the NFET structure are systematically studied and optimized. The research shows: (1) As the width of the beams and the thickness of the lower slab increases, the mechanical characteristics of the NFET structure does not change significantly; therefore, the recommended design reference value for these two are 240 mm and 80 mm, respectively. (2) When considering the cable and the drainage facilities, the stress state of the NFET structure is less affected (or even improved), which proves that the layout of the cable and the drainage facilities is feasible. (3) According to the analysis during different construction stages, the stress of the NFET rail seats is generally greater than the stress of the cast-in-place concrete. It is recommended that the intensity of the cast-in-place concrete should be greater than that of the prefabricated frame structure.