Abstract:Till now there is no mature calculation method to II. CALCULATION MODEL AND SOLUTION METHOD OF analyze the passive interference of the high voltage transmission RERADIATION FROM HIGH VOLTAGE OVERHEAD line to the radio station nearby. Based on the production TRANSMISSION LINE mechanism of the reradiation, the paper gives the simplified model of the tower and the transmission line by using equivalentThe metal barriers near radio station's antenna array, way, which make the simulation for the passive interference… Show more
“…When frequency is less than 1.7MHz, IEEE recommends tower and ground wire should be represented as different radius line models [16] . The model proposed in [2,5] uses wire model to represent the main material of angle-steel tower, while suggesting that this wire model couldn't be used at frequency over 16.7MHz. The three dimensional surface model of angle-steel tower and the solution method are proposed in [8] to research interference at higher frequency.…”
Section: A Selction Of Reradition Interference Methodsmentioning
confidence: 99%
“…Ref. [2,5] gave the protecting distance between UHVAC power lines and receiving station. In the calculation, interference value is calculated at the resonance frequency to ensure that the value is the maximum, and the protection distance, with the corresponding interference, is found less than the allowable value of receiving station.…”
In the construction of UHVDC power line in China, the national standard of reradiation interference protecting distance between UHVDC power line and receiving station of AM broadcasting needs to be renewed. In this paper, the wire-surface simulation model is used to calculate the interference. In the model, steel tower is represented as surface model, ground wire is represented as wire model, and the whole model is excitated by vertical polarization plane wave. For the deficiency of traditional solution method of protecting distance calculation, a new method is proposed. It is recommended that the whole work frequency band of receiving station should be calculated to determine the space interval which has actual protecting distance. Then the interval is gradually narrowed with dichotomy method until the interval size is within allowable value. With the first-grade receiving station of AM broadcasting as example, the reradiation interference protecting distance from UHVDC power line and station is calculated..
“…When frequency is less than 1.7MHz, IEEE recommends tower and ground wire should be represented as different radius line models [16] . The model proposed in [2,5] uses wire model to represent the main material of angle-steel tower, while suggesting that this wire model couldn't be used at frequency over 16.7MHz. The three dimensional surface model of angle-steel tower and the solution method are proposed in [8] to research interference at higher frequency.…”
Section: A Selction Of Reradition Interference Methodsmentioning
confidence: 99%
“…Ref. [2,5] gave the protecting distance between UHVAC power lines and receiving station. In the calculation, interference value is calculated at the resonance frequency to ensure that the value is the maximum, and the protection distance, with the corresponding interference, is found less than the allowable value of receiving station.…”
In the construction of UHVDC power line in China, the national standard of reradiation interference protecting distance between UHVDC power line and receiving station of AM broadcasting needs to be renewed. In this paper, the wire-surface simulation model is used to calculate the interference. In the model, steel tower is represented as surface model, ground wire is represented as wire model, and the whole model is excitated by vertical polarization plane wave. For the deficiency of traditional solution method of protecting distance calculation, a new method is proposed. It is recommended that the whole work frequency band of receiving station should be calculated to determine the space interval which has actual protecting distance. Then the interval is gradually narrowed with dichotomy method until the interval size is within allowable value. With the first-grade receiving station of AM broadcasting as example, the reradiation interference protecting distance from UHVDC power line and station is calculated..
“…[2,5] gave the protecting distance between UHVAC power lines and receiving station. In the calculation, interference value is calculated at the resonance frequency to ensure that the value is the maximum, and the protection distance, with the corresponding interference, is found less than the allowable value of receiving station.…”
In the construction of UHVDC power line in China, the national standard of reradiation interference protecting distance between UHVDC power line and receiving station of AM broadcasting needs to be renewed. In this paper, the wiresurface simulation model is used to calculate the interference. In the model, steel tower is represented as surface model, ground wire is represented as wire model, and the whole model is excitated by vertical polarization plane wave. For the deficiency of traditional solution method of protecting distance calculation, a new method is proposed. It is recommended that the whole work frequency band of receiving station should be calculated to determine the space interval which has actual protecting distance. Then the interval is gradually narrowed with dichotomy method until the interval size is within allowable value. With the first-grade receiving station of AM broadcasting as example, the reradiation interference protecting distance from UHVDC power line and station is calculated.
“…In order to avoid the interference, the protecting distance, a reference for power line design, should be instituted. In [2,4], a wire model of reradiation interference and the protecting distance on radio station from UHVAC power lines have been proposed.…”
According to the current solution method of reradiation interference protecting distance between radio station and UHV power lines, the resonance characteristics of interference is a key issue in decreasing the protecting distance. The wire-surface simulation model, in which steel tower is represented as surface model and ground wire is represented as wire model, is excitated by vertical polarization plane wave. Based on the method of moments (MoM), the base function of wire-surface model junction point and the computation method are discussed. With various frequencies, the interference values are calculated. The possible impact factors of interference resonance, such as ground wire, conductor, number of towers and tower spans, are studied. The results show that the decisive impact factor on reradiation interference is tower spans. It is concluded that interference is mainly decided by electromagnetic scatter from power towers in short wave and above.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.