Repeated UAV Observations and Digital Modeling for Surface Change Detection in Ring Structure Crater Margin in Plateau

Abstract

As UAV technology has been leaping forward, small consumer-grade UAVs equipped with optical sensors are capable of easily acquiring high-resolution images, which show bright prospects in a wide variety of terrains and different fields. First, the crater rim landscape of the Dinosaur Valley ring formation located on the central Yunnan Plateau served as the object of the surface change detection experiment, and two repetitive UAV ground observations of the study area were performed at the same altitude of 180 m with DJI Phantom 4 RTK in the rainy season (P1) and the dry season (P2). Subsequently, the UAV-SfM digital three-dimensional (3D) modeling method was adopted to build digital models of the study area at two points in time, which comprised the Digital Surface Model (DSM), Digital Orthomosaic Model (DOM), and Dense Image Matching (DIM) point cloud. Lastly, a quantitative analysis of the surface changes at the pit edge was performed using the point-surface-body surface morphological characterization method based on the digital model. As indicated by the results, (1) the elevation detection of the corresponding check points of the two DSM periods yielded a maximum positive difference of 0.2650 m and a maximum negative value of −0.2279 m in the first period, as well as a maximum positive difference of 0.2470 m and a maximum negative value of −0.2589 m in the second period. (2) In the change detection of the two DOM periods, the vegetation was 9.99% higher in the wet season than in the dry season in terms of coverage, whereas the bare soil was 10.54% more covered than the wet season. (3) In general, the M3C2-PM distances of the P1 point cloud and the P2 point cloud were concentrated in the interval (−0.2,0.2), whereas the percentage of the interval (−0.1,0) accounted for 26.69% of all intervals. The numerical model of UAV-SfM was employed for comprehensive change detection analysis. As revealed by the result of the point elevation difference in the constant area, the technique can conform to the requirements of earth observation with certain accuracy. The change area suggested that the test area can be affected by natural conditions to a certain extent, such that the multi-source data can be integrated to conduct more comprehensive detection analysis.