Renewable and robust biomass carbon aerogel derived from deep eutectic solvents modified cellulose nanofiber under a low carbonization temperature for oil-water separation

Long, Sishi; Feng, Yunchao; Liu, Yizheng; Zheng, Ling‐Ling; Gan, Lihui; Liu, Jian; Zeng, Xianhai; Long, Minnan

doi:10.1016/j.seppur.2020.117577

Cited by 89 publications

(34 citation statements)

References 67 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Hydrophobic modification in the form of carbon has become increasingly important, since this is considered as a green alternative to silanization. Typically, organic matrices are pyrolyzed under the exclusion of oxygen (e.g., 800 °C under N 2 [ 67 ] or at even lower temperatures, 350 °C [ 68 ]), and/or mixed with graphene oxide (GO), which could also be reduced to graphene (e.g., 200 °C under H 2 [ 69 , 70 ]). In other cases, graphite flakes [ 71 ] or carbon nanotubes (CNTs) [ 72 ] are directly mixed with the cellulosic matrices before freeze-drying.…”

Section: Surface Modification Of Cellulose and Nanocellulosementioning

confidence: 99%

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

et al. 2021

View full text Add to dashboard Cite

Recent developments in the application of lignocellulosic materials for oil spill removal are discussed in this review article. The types of lignocellulosic substrate material and their different chemical and physical modification strategies and basic preparation techniques are presented. The morphological features and the related separation mechanisms of the materials are summarized. The material types were classified into 3D-materials such as hydrophobic and oleophobic sponges and aerogels, or 2D-materials such as membranes, fabrics, films, and meshes. It was found that, particularly for 3D-materials, there is a clear correlation between the material properties, mainly porosity and density, and their absorption performance. Furthermore, it was shown that nanocellulosic precursors are not exclusively suitable to achieve competitive porosity and therefore absorption performance, but also bulk cellulose materials. This finding could lead to developments in cost- and energy-efficient production processes of future lignocellulosic oil spillage removal materials.

show abstract

Section: Surface Modification Of Cellulose and Nanocellulosementioning

confidence: 99%

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

et al. 2021

View full text Add to dashboard Cite

show abstract

“…A bottom-up assembly process is commonly used for the preparation of superhydrophobic aerogels [ 19 , 20 ]. So far, a variety of superhydrophobic aerogels have been developed, including silica-based aerogels [ 21 , 22 ], carbon-based aerogels [ 23 , 24 , 25 , 26 ], cellulose-based aerogels [ 27 , 28 , 29 , 30 , 31 , 32 ], and boron nitride aerogels [ 33 ], etc. Among them, the cellulose aerogel has been considered as the most promising aerogel.…”

Section: Introductionmentioning

confidence: 99%

Facile Fabrication of Superhydrophobic Cross-Linked Nanocellulose Aerogels for Oil–Water Separation

et al. 2021

View full text Add to dashboard Cite

A facile and environmental-friendly approach was developed for the preparation of the cross-linked nanocellulose aerogel through the freeze-drying process and subsequent esterification. The as-prepared aerogel had a three-dimensional cellular microstructure with ultra-low density of 6.05 mg·cm−3 and high porosity (99.61%). After modifying by chemical vapor deposition (CVD) with hexadecyltrimethoxysilane (HTMS), the nanocellulose aerogel displayed stable super-hydrophobicity and super-oleophilicity with water contact angle of 151°, and had excellent adsorption performance for various oil and organic solvents with the adsorption capacity of 77~226 g/g. Even after 30 cycles, the adsorption capacity of the nanocellulose aerogel for chloroform was as high as 170 g/g, indicating its outstanding reusability. Therefore, the superhydrophobic cross-linked nanocellulose aerogel is a promising oil adsorbent for wastewater treatment.

show abstract

“…19 The synthetic polymers not only modified the properties of biopolymers and also decrease the degradation rate of degradation which makes them useful for various applications. [20][21][22][23] Starch is a tasteless, odorless white color semicrystalline polysaccharide that is nontoxic partially water-soluble. [24][25][26][27][28][29] Different researchers modified the starch for improving its tensile strength, thermal stability, conductivity, water solubility, and hardness.…”

Section: Introductionmentioning

confidence: 99%

“…To fulfill the increasing demand for plastic, it is needed to modified natural polymers with synthetic polymers 19 . The synthetic polymers not only modified the properties of biopolymers and also decrease the degradation rate of degradation which makes them useful for various applications 20–23 …”

Section: Introductionmentioning

confidence: 99%

Green synthesis of biodegradable terpolymer modified starch nanocomposite with carbon nanoparticles for food packaging application

Iqbal

Nadeem

Bano

et al. 2021

J of Applied Polymer Sci

View full text Add to dashboard Cite

As to control the increased rate of environmental pollution there is an urgent need to develop improved biodegradable materials regarding the old polymeric packaging materials. It has been done by the incorporation of carbon nanomaterials to the biodegradable starch terpolymers of acrylic acid, methyl methacrylate (MMA), acrylonitrile (AN), 2-Ethylhexyl acrylate (2-EHA), and Ethyl acrylate (EA). The starch-terpolymers were prepared through the free radical polymerization technique using AA, MMA, AN, 2-EHA, EA as monomers. Two different starch-terpolymers were further mixed with carbon nanoparticles (NPs) to form a biodegradable nanocomposite. The biodegradable starch-grafted terpolymers-carbon nanocomposites (STPC NCs) were characterized through scanning electron microscopy, Fourier-transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimeter, and UV-Visible spectrophotometry. Further, resistivity, electrical conductivity, and biodegradability tests were performed to check its properties for packing materials. The biodegradation of SGCP-composites recorded using the soil burial method was up to 78%. Starch-terpolymers were prepared via free-radical polymerization The biodegradation capability of starch-grafted terpolymers was found to be 78% Shahid Iqbal and Sohail Nadeem contributed equally

show abstract

Renewable and robust biomass carbon aerogel derived from deep eutectic solvents modified cellulose nanofiber under a low carbonization temperature for oil-water separation

Cited by 89 publications

References 67 publications

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

Facile Fabrication of Superhydrophobic Cross-Linked Nanocellulose Aerogels for Oil–Water Separation

Green synthesis of biodegradable terpolymer modified starch nanocomposite with carbon nanoparticles for food packaging application

Contact Info

Product

Resources

About