Removal of NO by carbon-based catalytic reduction bed loaded with Mn induced by dielectric barrier discharge at low temperature

Abstract

The current paper reports on a newly developed DBD-Mn/FCRB hybrid system to explore the removal of NO x by reduction without adding reducing gas at low temperature (below 80℃). This technology was established with a fixed carbon-based reduction catalytic reduction bed loaded with manganese (Mn/FCRB) induced by dielectric barrier discharge (DBD). The NO conversion and N 2 selectivity in the new hybrid system reached 90.9% and 79.9% respectively under 8% oxygen content, 1,200 J/L specific input energy (SIE), which were all higher than in the single DBD and DBD-FCRB systems, respectively. The Mn/FCRB was further characterized before and after activation by SEM, XRD and XPS. The possible reaction pathways of denitration were proposed through three processes based on the experimental results: direct denitration of active carbon atoms excited by plasma, reduction by adsorptive C(N) and C(O) complexes on the FCRB surface, and the reaction of nitrogen oxides with by-product CO. In addition, the results also showed that the new in-situ reduction denitration system had strong oxygen shock resistance and water resistance.