Reliability-based assessment of reasonable mid-tower lateral stiffness for a three-tower suspension bridge

Abstract

A reasonable lateral stiffness of the bridge mid-tower should ensure that the deflection-to-span ratio and sliding resistance coefficient satisfy the design requirements. However, if this stiffness is determined by the deterministic parametric analysis, the above two verification indices may exceed the threshold due to the randomness of the high-dimensional structure and load parameters. To satisfy the structural safety requirements of a three-tower suspension bridge during its design life, this study proposes a method to quickly and accurately evaluate the reliability indices of the deflection-to-span ratio and sliding resistance coefficient of the three-tower suspension bridge. Based on advanced first-order second-moment, the proposed method transforms the reliability problem into an optimization problem with constraint functions, uses the single-cable theory to establish the limit state function, and combines the manta ray foraging optimization algorithm and penalty function to derive the reliability index. The effectiveness of the proposed method is verified by performing Latin hypercube sampling for an examplary three-tower suspension bridge. These results prove that the new technique avoids tedious finite element simulation and surrogate model fitting, ensuring the accuracy of the reliability index while improving the calculation efficiency. The study further identifies critical structural parameters by parametric analysis. Based on the inverse reliability, the dimensionless stiffness range for the mid-tower with the randomness of the parameters is derived, and the preliminary design method of the lateral stiffness of the mid-tower based on the reliability is established.

Structural Safety Assessment of the Transmission Tower Using Bayesian Network

“…The procedure is intuitive and the calculation speed is the biggest advantage of this method. [4] However, many reports [5] pointed out that the safety coefficient of the static analysis is not precise enough, the static calculation result is sometimes unreasonable, and the simplified mode needs to be further studied. Reliability analysis can solve these problems and has become an important method for the safety assessment of transmission tower structures.…”