Relation of acoustic impedance to stiffness and porosity of Maastrichtian chalk in Dan field, Danish North Sea

Abstract

In seismic data analysis, acoustic impedance may be used for predicting the porosity of a sedimentary layer with known lithology, where the influence on impedance from pore fluid is known. This method typically assumes that the stiffness of the rock frame is solely a function of porosity and that there is no variation in stiffness between rocks with the same composition and porosity. However, contact cementation can cause an increase in rock frame stiffness with no significant reduction in porosity. This means that rocks with similar porosities and varying degrees of cementation would have significantly different elastic moduli; thus, attempting to derive porosity from seismic impedance alone would incur errors. The primary goal of this study is to assess how significant this error is for porosity prediction. The secondary goal is to calculate the dry rock frame stiffness across the field and evaluate to what extent the time of hydrocarbon placement affects the lithification of the rock. To fulfill these objectives, we studied petrophysical logs and core data from the Dan field and derived seismic impedance, porosity and stiffness expressed in terms of Biot's coefficient for 14 wells across the field. Trends defined between acoustic impedance, porosity, and Biot's coefficient in the Maastrichtian unit of the Dan field showed that, for a given porosity and water saturation in the oil zone, the chalk located at the crest of the reservoir is softer than the chalk located at the flanks of the field. We also found that chalk is stiffer in the down-faulted north-western part of the field for a given porosity and water saturation in the oil zone. In the water zone, no difference was found. We speculate that contact cementation downflank in the northwest block caused an increase in the chalk stiffness without reducing the porosity, while earlier hydrocarbon filling of the south-eastern block and the crest of the structure delayed contact cementation between the chalk particles. This difference in contact cementation between rocks of the same porosity causes porosity prediction from acoustic impedance to vary by up to six porosity units.