Refined Calculation of the Bearing Stiffness and Load in the Presence of Radial Clearance

Nakhatakyan, F. G.; Puzakina, A. K.; Nakhatakyan, D. F.

doi:10.3103/s1052618820070109

Cited by 1 publication

(1 citation statement)

References 11 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Perret et al 8 found that the load distribution, contact area, and contact stress were changed with time caused by the rotation of the rolling element in engineering practice. These cases resulted in the changes of stiffness with time, [9][10][11] and induced nonlinear vibration and instability of rolling bearing rotor system finally. [12][13][14][15] Cao et al 16 researched the stiffness variation rules of rolling bearing under the static load and unbalanced load excitation, and calculated the vibration response of time domain and the frequency domain characteristics of the rotor under the time-varying bearing stiffness.…”

Section: Introductionmentioning

confidence: 99%

Vibration characteristics analysis of rolling bearing rotor system considering radial clearance and outer raceway defect

Chen

Liu

Tang

et al. 2023

Advances in Mechanical Engineering

View full text Add to dashboard Cite

Because of the radial clearance, the radial stiffness of rolling bearing will show obvious time-varying characteristics, which may cause a certain vibration. The small defects on the raceway of the rolling bearing maybe caused by the vibration under the poor lubrication conditions. A dynamic model of rolling bearing rotor system considering the radial clearance and outer raceway defect is established in this paper. The time-varying stiffness of rolling bearing is fitted by 8-order Fourier series and substituted into the dynamic model. The vibration response of rotor system is obtained to analyze the fault characteristic frequency of rolling bearing. The vibration test of rolling bearing rotor system is carried out, and the fault characteristic frequency of the test bearing is identified by analyzing the frequency spectrum of the obtained vibration signal. The test results are in good agreement with the theoretical values, which verifies the correctness of the dynamic model.

show abstract