Reducing the Collision Damage Done to the Tips of Steel Needles during Integrated Piercing by Using Shape Optimization with Feature Selection

Abstract

Recent research has shown that, during integrated piercing, the yarn tension can displace the needles from the centers of the holes in the piercing template. To reduce the damage done to the needle tips when the needles and the hole walls collide when the needle displacement is too large, this paper proposes a method for optimizing the needle shape that satisfies the strength constraint while targeting minimum needle displacement. First, the optimal objective function and strength constraint conditions for the tip displacement of the integrated puncture needle are established, which are affected by many factors. Then, the feature selection method of machine learning is used to reduce the dimensionality of the objective function after data reduction, and the feasible region of key features is reduced to avoid falling into the local best point in the optimization iteration. Finally, machine vision is used to measure experimentally the tip displacement of a needle array. The results show that the average tip displacement is reduced by 18.16–31.42% and the collision risk is reduced from 43.14% to 5.54%. It shows that the optimization method of needle shape based on feature selection is effective for reducing needle tip impact damage during integrated piercing.

Analysis of Mechanical Behavior of Different Needle Tip Shapes During Puncture of Carbon Fiber Fabric

“…dimensional damaged twill fabrics and non-woven fabrics [14]. Furthermore, an explicit dynamic algorithm was proposed to simulate the needle punching process of the fabric cord using the fi nite element method [15,16].…”