Recycling of Ceramic Tiles and Marble Powder waste as Partial Substitution in Concrete

Abstract

Recycling the waste has been one of the most influential aspect affecting global conditions of the world. In the world of Civil Engineering, it serves the purpose of preservation of the natural building materials such as Sand, Stones, etc. Fair amount of work been done on utilization of the waste such as Fly ash, marble waste, tiles waste, plastic, etc. used as different forms of replacement, provokes the need of work still to be done. So much of the work has been done on wastes available from Marble and Tiles. The combined effect of waste marble powder (M.P) and Ceramic tile waste (CTW) as partial replacement of Cement (10%) and Coarse Aggregates (10%,20%,30% respectively) is to be observed and analyzed. The obtained results will be compared with the conventional cement concrete at 7 and 28 days of Curing. Total 24 number of cylinders casted and tested for their workability and Compressive strength. The Workability of Concrete with replacement decreased with increasing ratio of replacement as well as its Compressive Strength. The Compressive strength of concrete with replacement is approximately of same value as that of Conventional Concrete at (10%+10%) partial substitution ratio.

Influence of Waste Marble Dust on the Improvement of Expansive Clay Soils

“…Also, recycling of waste keeps this material from being dumped into landfills and consuming landfill space. Many countries are functioning on the way to recycle and reuse solid wastes in applied science applications, like the assembly of concrete mix and therefore the manufacture of bricks, decorative plastic coating, ceramic tiles, cement, activated carbonate, lime, hollow blocks, wall tiles, and filler materials for embankments [3][4][5][6][7]. Stabilization using solid wastes is one of the different techniques to improve the engineering properties of problematic soils to make them suitable for construction [8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24].…”

Influence of Waste Marble Powder and Waste Granite Powder on the Mechanical and Durability Performance of Concrete

“…Some things were noticed if marble powder was added with partial replacement of cement, it did not affect the final setting time of concrete. We replace marble powder with partial replacement of cement for making high strength, the coarse and fine aggregate particles themselves must be strong, which are the main important constituents in concrete Williams .C, P, and Kala .T (2008) Soomro et al (2021). Adding marble powder with partial replacement of cement to concrete is reduce shrinkage, and low-cost concrete Vijayalakshmi, Sekar, and Ganesh prabhu (2013).…”