Reconfigurable Intelligent Surface Assisted Target Three-Dimensional Localization with 2-D Radar

Abstract

Battlefield surveillance radar is usually 2-D radar, which cannot realize target three-dimensional localization, leading to poor resolution for the air target in the elevation dimension. Previous researchers have used the Traditional Height Finder Radar (HFR) or multiple 2-D radar networking to estimate the target three-dimensional location. However, all of them face the problems of high cost, poor real-time performance and high requirement of space–time registration. In this paper, Reconfigurable Intelligent Surfaces (RISs) with low cost are introduced into the 2-D radar to realize the target three-dimensional localization. Taking advantage of the wide beam of 2-D radar in the elevation dimension, several Unmanned Aerial Vehicles (UAVs) carrying RISs are set in the receiving beam to form multiple auxiliary measurement channels. In addition, the traditional 2-D radar measurements combined with the auxiliary channel measurements are used to realize the target three-dimensional localization by solving a nonlinear least square problem with a convex optimization method. For the proposed RIS-assisted target three-dimensional localization problem, the Cramer–Rao Lower Bound (CRLB) is derived to measure the target localization accuracy. Simulation results verify the effectiveness of the proposed 3-D localization method, and the influences of the number, the positions and the site errors of the RISs on the localization accuracy are covered.