Receiver Front-End Circuits for Future Generations of Wireless Communications

Abstract

Document VersionPublisher's PDF, also known as Version of Record (includes final page, issue and volume numbers)Please check the document version of this publication:• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website.• The final author version and the galley proof are versions of the publication after peer review.• The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rightsCopyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.• Users may download and print one copy of any publication from the public portal for the purpose of private study or research.• You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal ? Take down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim. Abstract-In this paper, new receiver concepts and CMOS circuits for future wireless communications applications are introduced. The concepts derived are applied to a few classes of wireless communications standards that are broad-band at radio frequencies and/or require a broad-band baseband circuitry. Multimode multiband operation and adaptivity as key requirements for future generation receivers are highlighted throughout the paper. The tradeoffs between power consumption, noise figure and linearity performance of low-noise amplifiers, mixers, and intermediate frequency filters are considered too.Index Terms-Broad-band radio frequency (RF), multiband circuits, multimode circuits, RFCMOS.

Quadrature spatial modulation–performance analysis and impact of imperfect channel knowledge

“…Overcoming this challenge requires innovations in various areas including novel ways for spectrum sensing and reuse, mechanisms for using higher frequencies such as 60 GHz and the visible light, novel ideas for dealing with interference, multiple-input multiple-output (MIMO), and generally more efficient protocols and systems [1][2][3][4][5][6][7][8][9][10][11][12]. MIMO technology promises a linear gain in capacity with the number of antennas [13], but it is yet to be adopted on a scale commensurate with its true potential [14][15][16].…”

Mems-Based Oscillators: A Review

“…To date, the major hurdle in achieving a completely silicon based heterodyning transceiver is the off-chip resonators, which typically does not have integrated circuit (IC) compatible fabrication methods [15]. A key component in the transceiver system, these resonators are often utilized for frequency selection in the radio-frequency (RF) and intermediate-frequency (IF) stages.…”

RF oscillator implementation using integrated CMOS surface acoustic wave resonators

“…To date, the major hurdle in achieving a completely silicon based heterodyning transceiver is the off-chip resonators, which typically does not have integrated circuit (IC) compatible fabrication methods [4]. A key component in the heterodyne transceiver system, these resonators are often utilized for frequency selection in the radio-frequency (RF) and intermediate-frequency (IF) stages.…”