Real-Time Optimal Control Strategy for Multienergy Complementary Microgrid System Based on Double-Layer Nondominated Sorting Genetic Algorithm

Abstract

Because of the problems of low operation efficiency and poor energy management of multienergy input and output system with complex load demand and energy supply, this paper uses the double-layer nondominated sorting genetic algorithm to optimize the multienergy complementary microgrid system in real-time, allocating reasonably the output of each energy supply end and reducing the energy consumption of the system on the premise of meeting the demand of cooling, thermal and power load, so as to improve the economy of the whole system. According to the system load demand and operation mode, the first layer of this double-layer operation strategy calculates the power required by each node of the microgrid system to reduce the system loss. The second layer calculates the output of each equipment by using nondominated sorting genetic algorithm with various energy values calculated in the first layer as constraint conditions, considering the operation characteristics of various equipment and aiming at economy and environmental protection. In this paper, a typical model of energy input-output is established. This model combines with the operation control strategy suitable for multienergy complementary microgrid system, considers the operation mode and equipment characteristics of the system, and uses a double-layer nondominated sorting genetic algorithm to optimize the operation of each equipment in the multienergy complementary system in real time, so as to reduce the operation cost of the system.

A Hybrid Deep Learning‐Based Network for Photovoltaic Power Forecasting

“…For training purposes, these datasets are divided into 70% for training, 20% for validation, and 10% for testing. e performance of the proposed model is evaluated on the four widely used forecasting metrics such as MSE, MAE, RMSE, and MBE, which are mathematically expressed in equations ( 8) to (11).…”

“…In contrast, an effective PV power forecasting model greatly improves solar power utilization [8][9][10]. erefore, efficient forecasting models in the utility grid will operate the power grid economically and transfer the required energy to the end-users [11,12]. Over the years, for efficient energy management and distribution, MG has played an important role in ensuring reliability, two-way power flow, self-healing, and demand response [6].…”

Integration and Modeling of Multi‐Energy Network Based on Energy Hub

“…When the Newton-Raphson method is used for unified iterative calculation of power flow in a thermal system, the selected state variable is (19), the correction equation is (20), and the Jacobian matrix and its elements are ( 21)-( 24). e subscript of each matrix is the number of rows and columns of the matrix, m mix is the number of nodes with pipeline crossing in the load node, m non−mix is the node without pipeline crossing in the heat supply network load node.…”

“…(1) Input the original data of the thermal system, including network topology and node parameters; classify and number the nodes, and select the balance node of the heating network [18,19]…”

Modeling and Control Strategy for Multiterminal Flexible DC Distribution Network with Echelon Utilization Power Battery

“…Multisource coordination is a kind of power supply method which adopts multiple types of distributed power supply and utilizes the complementary characteristics of different distributed power supplies to improve the output characteristics of distributed power supply [27,28]. For example, solar energy and wind energy have strong intermittency and fluctuation, respectively, so the output power of solar power generation device and wind power generation device also has intermittency and fluctuation.…”