Real-time location system-based asset tracking in the healthcare field: lessons learned from a feasibility study

Abstract

BackgroundNumerous hospitals and organizations have recently endeavored to study the effects of real-time location systems. However, their experiences of system adoption or pilot testing via implementation were not shared with others or evaluated in a real environment. Therefore, we aimed to share our experiences and insight regarding a real-time location system, obtained via the implementation and operation of a real-time asset tracking system based on Bluetooth Low Energy/WiFi in a tertiary care hospital, which can be used to improve hospital efficiency and nursing workflow.MethodsWe developed tags that were attached to relevant assets paired with Bluetooth Low Energy sensor beacons, which served as the basis of the asset tracking system. Problems with the system were identified during implementation and operation, and the feasibility of introducing the system was evaluated via a satisfaction survey completed by end users after 3 months of use.ResultsThe results showed that 117 nurses who had used the asset tracking system for 3 months were moderately satisfied (2.7 to 3.4 out of 5) with the system, rated it as helpful, and were willing to continue using it. In addition, we identified 4 factors (end users, target assets, tracking area, and type of sensor) that should be considered in the development of asset tracking systems, and 4 issues pertaining to usability (the active tag design, technical limitations, solution functions, and operational support).ConclusionsThe successful introduction of asset tracking systems based on real-time location in hospitals requires the selection of clear targets (e.g., users and assets) via analysis of the user environment and implementation of appropriate technical improvements in the system as required (e.g., miniaturization of the tag size and improvement of the sensing accuracy).

Measuring impact of a quality improvement initiative on glaucoma clinic flow using an automated real-time locating system

“…To our knowledge, this was the first study to use lean principles and an RFID-based RTLS in a glaucoma clinic. This combinatory approach has been frequently used in other specialties including in emergency medicine [ 25 ], family medicine [ 26 ], radiology [ 27 ], oncology [ 28 , 29 ], surgery [ 30 ], and intensive care units [ 31 ]. It possesses promising potential to guide data-driven change within the field of glaucoma care.…”

Exploring the Impact of Obesity on Health Care Resources and Coding in the Acute Hospital Setting: A Feasibility Study

“…This may improve the accuracy of estimated staff–patient interaction, particularly during private occasions where observation data cannot be collected. However, this will also require additional considerations to be made, including the choice of RTLS technology suitable for the study site, cost of implementation, interference concerns, patient and staff acceptability, and technological limitations [ 46 , 47 , 48 ].…”

Review of Smart Hospital Services in Real Healthcare Environments

“…can improve the efficiency of logistics management related to hospital work and the workflow of medical staff [15,16] (Figure 1). The University Health System, a medical institution in the United States, introduced a smart infusion pump with an attached RFID, which has been reported to increase productivity and efficiency by reducing the time required for the medical staff to use the device in the hospital from the previous maximum of 2 hours to 8-12 minutes through real-time location monitoring [17].…”