Real field mission profile oriented design of a SiC-based PV-inverter application

Abstract

This paper introduces a real field mission profile oriented design tool for the new generation of grid connected PVinverters applications based on SiC-devices. The proposed design tool consists of a grid connected PV-inverter model, an Electro-Thermal model, a converter safe operating area (SOA) model, a mission profile model and an the evaluation block. The PVsystem model involves a three level bipolar switch neutral point clamped (3L-BS NPC) inverter connected to the three phase grid through a LCL-filter. Moreover, the SOA model calculates the required converter heatsink thermal impedance Z th_H in order to perform in a safe mode for the whole operating range. Furthermore, the proposed design tool considers the mission profile (the measured solar irradiance and ambient temperature) from the real field where the converter will operate. Thus, a realistic loading of the converter devices is achieved. To consider one year real field measurements of the mission profile, an accurate long term simulation model is developed. The model predicts the junction and case temperature of the converter devices, for three different case scenarios. In the first case, a one year mission profile is used into the model with a sampling rate of five minutes. For the second and third case, a more detailed analysis is performed for one week mission profile (in the wintersummer time) with a sampling rate of 25 s. The simulation results shows the thermal loading distribution among the converter devices (MOSFET, IGBT+FD) in terms of junction (average, peak, ∆T) and case (average) temperature for all three simulation cases. Finally, the evaluation block is used to analyze the results in order to perform a thermal loading-based classification of the converter devices.

Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview

“…Based on the converter level specifications, the major design constrains of dc link are dclink voltage level, limit of dc-link voltage ripple, volume, cost and lifetime. Another important aspect of the definition is the environmental conditions (e.g., ambient temperature profile, humidity profile) [41]. Based on the above information, the ripple current stress can be calculated and therefore the required minimum capacitance can be preliminarily determined.…”