Reactive Distillation Applied to Biodiesel Production by Esterification: Simulation Studies

Abstract

Reactive distillation is an operation that combines chemical reaction and separation in a single equipment, presenting various technical and economic benefits. In this chapter, an introduction to the reactive distillation process applied to the biodiesel industry was developed and complemented by case studies regarding the production of biodiesel through esterification a low-cost acid feedstock (corn distillers oil) and valorization of by-products (glycerol) through ketalization. The kinetic parameters of both reactions were estimated with an algorithm that performs the minimization of the quadratic differences between experimental and calculated data through a Nelder-Mead simplex method. A 4th order Runge Kutta method was employed to integrate the conversion or concentration equations used to describe the kinetics of the reactions in a batch reactor. Both processes were simulated in the commercial software Aspen Plus with the estimated kinetic parameters. The results obtained are promising and indicate that the productivity of both processes can be improved with the application of reactive distillation technologies. The simulated esterification process with an optimized column resulted in a fatty acids conversion increase of 84% in comparison to the values lower than 50% obtained in the experimental tests. Solketal production through ketalization also achieved a high glycerol conversion superior to 98%.