Rare Earths’ Recovery from Phosphogypsum: An Overview on Direct and Indirect Leaching Techniques

Abstract

The need for rare earths elements (REEs) in high tech electrical and electronic based materials are vital. In the global economy, deposits of natural REEs are limited except for countries such as China, which has prompted current attempts to seek alternative resources of REEs. This increased the dependence on major secondary rare earth-bearing sources such as scrap alloy, battery waste, spent catalysts, fly ash, spent magnets, waste light-emitting diodes (LEDs), and phosphogypsum (PG) for a substantial recovery of REEs for use. Recycling of REEs from these alternative waste sources through hydrometallurgical processes is becoming a sustainable and viable approach due to the low energy consumption, low waste generation, few emissions, environmentally friendliness, and economically feasibility. Industrial wastes such as the PG generated from the production of phosphoric acid is a potential secondary resource of REEs that contains a total REE concentration of over 2000 mg/kg depending upon the phosphate ore from which it is generated. Due to trace concentration of REEs in the PG (normally < 0.1% wt.) and their tiny and complex occurrence as mineral phases the recovery process of REE from PG would be highly challenging in both technology and economy. Various physicochemical pre-treatments approaches have been used up to date to up-concentrate REEs from PG prior to their extraction. Methods such as carbonation, roasting, microwave heating, grinding or recrystallization have been widely used for this purpose. This present paper reviews recent literature on various techniques that are currently employed to up-concentrate REs from PG to provide preliminary insight into further critical raw materials recovery. In addition, the advantages and disadvantages of the different strategies are discussed as avenues for realization of REE recovery from PG at a larger scale. In all the different approaches, recrystallization of PG appears to show promising advantages due to both high REE recovery as well as the pure PG phase that can be obtained.

Recovery of vanadium and nickel from heavy oil fly ash (HOFA): a critical review

“…However, HF acid can dissolve silicates and completely extract Si and Ti. 21,22 The mixture of 1 : 1 concentrated HCl-HNO 3 with water, dissolved 49 elements. 23 The most common digestion methods of y ash for extraction of heavy metals involve the use of aqua regia solution (3 : 1 HCl-HNO 3 ) and reverse aqua regia solution (1 : 3 HCl-HNO 3 ).…”

“…32 Research is directed to reach optimal leaching conditions, which include the leaching agents, temperature, residence time (contact time), agitation speed, particle size, and solid to liquid ratio (S/L). 22 Aburizaiza 26 studied the leachability of V, Ni, and Fe from HOFA generated in three different power and desalination plants using various leaching agents, including water, H 2 SO 4 , HNO 3 , and HCl. It was found that the most leachable metal is V with exothermic and spontaneous dissolution reactions.…”

Toward Net-Zero Emission Fertilizers Industry: Greenhouse Gas Emission Analyses and Decarbonization Solutions

“…Among the different existing technologies, the development of adsorption systems using physisorbent porous solids could be studied for capturing CO 2 from phosphoric acid production stacks. CO 2 could also be explored as a reagent in the valorization of phosphogypsum to extract some low content and trace elements. , …”

“…CO 2 could also be explored as a reagent in the valorization of phosphogypsum to extract some low content and trace elements. 59,60 2.3.4. Mineral Sequestration of CO 2 .…”

Scandium Recovery from Aqueous Solution by Adsorption Processes in Low-Temperature-Activated Alumina Products

“…Occupational safety and public health risks related to rare metals must be addressed and analysed for every metal in all the process stages: mining, transportation, processing and disposal, storage of waste and decommissioning of the equipment and production units. Many research papers targeting these issues recommend recovery instead of opening new mining operation units and the rapid return, as much as possible, toward a circular economy [ 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 , 19 , 20 , 21 , 22 , 23 , 24 , 25 , 26 , 27 , 28 , 29 , 30 , 31 , 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 ]. Scandium is one of the most valuable metals in the rare metals category.…”