RapidScat Cross-Calibration Using the Double Difference Technique

Abstract

RapidScat is a National Aeronautics and Space Administration (NASA) Ku-Band scatterometer that was operated onboard the International Space Station between September 2014 and August 2016 when the mission effectively ended after an irrecoverable instrument failure. A unique non-Sun-synchronous orbit facilitated global contiguous geographical sampling between the ±56 • latitude. For the first time, such an orbit enabled an overlap with other scatterometers flying in Sun-synchronous orbits. The double-difference technique was developed and successfully used for microwave radiometer calibration at the Remote Sensing Laboratory at the University of Central Florida, USA. This paper presents the extension of the double difference methodology to scatterometry. The methodology has been adopted for the cross-instrument calibration between RapidScat and QuikScat scatterometers simultaneously orbiting the Earth on-board two independent satellite platforms. The double-difference technique was deployed to compare measurements from these two scatterometers, as a more accurate alternative to the classic single difference approach. The work summarized in this paper addressed a cross-calibration algorithm developed and applied to RapidScat and QuikScat data in the period from January 2015 to March 2016. The initial results of the statistical analysis and biases between the two scatterometers are presented. Calculated biases may be used for measurement correction and reprocessing.

An Instrument Error Correlation Model for Global Navigation Satellite System Reflectometry

“…Single-and double-differencing are common techniques to calibrate remote sensing instruments, especially radiometers [39,40] and radars [41]. Both are useful for quantifying the correlated error structures in CYGNSS observations.…”

Radiometric Calibration of RapidScat Using the GPM Microwave Imager

“…It started making measurements over the Earth's surface in October 2014 and continued until August 2016. The instrument operated in a manner similar to QuikScat, a previous Ku-band scatterometer, as NASA had used the QuikScat's spare engineering unit to build the follow-up RapidScat instrument [1][2][3]. RapidScat is a dual-beam, conical-scanning, long-pulse radar system.…”