Rancangan Sensor Kecepatan Angin Pada Wind Tunnel

Haryanti, Munnik; Awaludin, Muhammad

doi:10.24912/tesla.v21i1.3246

Cited by 3 publications

(3 citation statements)

References 0 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…Terowongan angin merupakan alat yang digunakan di dalam penelitian bidang aerodinamika untuk mempelajari pengaruh pergerakan udara melewati benda padat. terowongan angin terdiri dari bagian-bagian tertutup yang salah satunya seksi uji dengan benda uji yang dipasang di tengah [1]. Terowongan angin adalah peralatan yang sangat penting untuk penelitian tentang aerodinamika, berupa aliran udara atau gas saat melewati benda uji seperti kendaraan, bangunan, turbin angin, dan lain-lain.…”

Section: Pendahuluanunclassified

“…Alat pengukur kecepatan angin atau anemometer berbasis mikrokontroler Arduino sudah banyak dibuat dan dikembangkan dalam beberapa penelitian sebelumnya [1,4,8,9,10,11]. Namun anemometer yang dibuat lebih banyak berjenis anemometer cup yang mengadopsi prinsip pengukuran dengan memanfaatkan hubungan antara kecepatan sudut dengan kecepatan linier memanfaatkan sensor optocoupler, sehingga penggunaannya terbatas untuk keperluan tertentu.…”

Section: Pendahuluanunclassified

See 1 more Smart Citation

Rancang Bangun Sensor Kecepatan Angin Berbasis Arduino untuk Terowongan Angin Low Subsonic

Junaidin¹,

Kusumaningrum²,

Prayogih³

et al. 2022

Jurnal Teknik Elektro AVITEC

View full text Add to dashboard Cite

The wind speed gauge in a wind tunnel plays an important role in the airflow simulation process so that it is similar to the actual conditions as desired. Wind speed measurement in wind tunnel mostly use manometer with special fluid (red manometer fluid) and the resulting data is in the form of analog data. The red manometer fluid is unavailable in Indonesia and its price is quite expensive so it becomes a challenge for wind tunnels that still use manometer. Therefore, it is necessary to make a new instrument for measuring wind speed that is easy to use by utilizing materials that are easily obtained but still apply the same measurement principles as a manometer in measuring wind speed in wind tunnels. The design of the wind speed measuring device can take advantage of microcontroller technology. The wind speed sensor design process goes through three stages including hardware design, software design, and system design. The hardware used for the system are an Arduino Uno R3 microcontroller, a differential pressure sensor MPXV7002DP, and an LCD. Research results obtain a wind speed sensor that can be used to measure wind speed in a low subsonic wind tunnel based on Bernoulli's principle that utilizes a pitot tube with a maximum speed of 30m/s. The wind speed sensor is an Arduino-based design that can display the wind speed measurement results on the LCD screen. The wind speed sensor was declared valid to be used to measure wind speed because there were no deviations from the wind speed measurement when compared to the measurement results from a calibrated anemometer.

show abstract

Section: Pendahuluanunclassified

Rancang Bangun Sensor Kecepatan Angin Berbasis Arduino untuk Terowongan Angin Low Subsonic

Junaidin¹,

Kusumaningrum²,

Prayogih³

et al. 2022

Jurnal Teknik Elektro AVITEC

View full text Add to dashboard Cite

show abstract

“…A wind tunnel is a tool used in aerodynamic research to study the effects of air moving past solid objects. A wind tunnel consists of a closed tubular section with the object under test mounted in the middle [3]. A powerful fan system moves air past the object.…”

Section: Introductionmentioning

confidence: 99%

Low Wind Speed Wind Tunnel Performance Test: Uniformity Wind Speed in Test Section

Erwin¹,

Hidayat²,

Wiyono³

2022

Proceedings of the Conference on Broad Exposure to Science and Technology 2021 (BEST 2021)

View full text Add to dashboard Cite

A wind tunnel is a tool used in aerodynamic research to study the effects of air moving past solid objects. A wind tunnel consists of a closed tubular section with the object under test mounted in the middle. This study conducted a test to verify the distributed airflow in the Test Section Wind Tunnel. The wind tunnel has several rooms with their respective functions. Broadly speaking, each chamber has an interrelated function, namely to maintain uniform airflow into the test chamber and out of the test chamber. Thus, the level of turbulence in the test room as long as there is no tested object will be eliminated. The test results get the average percentage of data on the whole field 1 to field 4, namely field three wind speed one m/s (6%) the highest and the lowest field four wind speed five m/s (0.4%). And the average data percentage of field 1 to field 4 (dots) at 1 m/s field 1 equal to 9.8% and at 4 m/s field 1 equal to 1.2%.

show abstract

Open Circuit Type Wind Tunnel Fabrication for Testing Wind Turbine Blade Aerodynamics

Yazid

Syuhada

Thaib

2022

Lecture Notes in Mechanical Engineering

View full text Add to dashboard Cite

Rancangan Sensor Kecepatan Angin Pada Wind Tunnel

Cited by 3 publications

References 0 publications

Rancang Bangun Sensor Kecepatan Angin Berbasis Arduino untuk Terowongan Angin Low Subsonic

Rancang Bangun Sensor Kecepatan Angin Berbasis Arduino untuk Terowongan Angin Low Subsonic

Low Wind Speed Wind Tunnel Performance Test: Uniformity Wind Speed in Test Section

Open Circuit Type Wind Tunnel Fabrication for Testing Wind Turbine Blade Aerodynamics

Contact Info

Product

Resources

About