Raised Pedestrian Crossings: Analysis of Their Characteristics on a Road Network and Geometric Sizing Proposal

Abstract

In urban areas traffic-calming strategies and pedestrian friendly measures are often adopted to reduce the adverse impacts of motor vehicles on vulnerable users. This study surveyed 24 raised pedestrian crossings (RPCs) to examine their geometrical and functional characteristics. Geometric characteristics, location, administrative and effective vehicle speed, and the whole-body vibration acceleration induced to vehicle occupants while they are passing over, were considered. In addition to the analysis of the field data, geometrical and functional criteria to design RPCs were carried out. Particularly, two design approaches have been considered. In the first one, RPC provides a designated route across a carriageway raised to the same level, or close to the same level, as the sidewalks that provide access to the pedestrian crossing. In such condition, an RPC is not a traffic-calming device and its design should satisfy geometrical and comfort criteria for designing roads. The results from the surveys demonstrated that less than 10% of RPCs guarantee ride comfort. According to the second design approach, an RPC acts both as a marked pedestrian feature and as a traffic-calming device (i.e., it is trapezoidal in shape with sharp edges). The analysis of the vertical accelerations on vehicle occupants reveal that more than 90% of the surveyed RPCs comply with geometrical and dynamic criteria for speed tables. Extreme variations concerning the observed geometrical characteristics of RPCs and the modelled dynamic performances have been observed: It results in noneffective treatments. Therefore, the results of this study would contribute to providing geometric best practices for overcoming the regulation gap in this subject, and designing RPCs according to international standards. pedestrian infrastructures is increasing [15,16]. Over the years, different systems have been adopted to reduce the risk of vehicle-pedestrian collisions, especially in urban areas. Speed control undulations (SCUs) are traffic-calming units that aim to increase pedestrian safety, as well as reduce noise and pollution from traffic in residential areas.Undulations are usually installed on residential, local, or collector roads; at any rate, these urban roads should not have buses, emergency traffic or, in general, heavy traffic, and should have an administrative speed limit of 20 or 30 km/h [5,17]. A warning sign with an adequate speed limit sign should be installed before an undulation [1,18]. When 15% of traffic exceeds the speed limit by 8-16 km/h the enforcement band is not effective [19], and the road manager could evaluate the installation of SCUs and/or other traffic-calming systems.Raised pedestrian crossings (RPCs) are used in urban areas to increase the walkability of neighborhoods [20] and to reduce the probability of pedestrian injuries and fatalities after a crash, either within specific traffic-calming programs, or more generally within Sustainable Urban Mobility Plans, with increased road safety being one of the main priorities in th...

Effect of Lane Narrowing Implemented on an Urban Dual Carriageway on Speed Reduction and Acoustic Environment

“…The effect of horizontal and vertical alignment on the speed of traffic was described in [10,11]. The effect of various traffic calming measures on the traffic speed in built-up areas was described, for example, in [12][13][14][15][16]. However, the actual effectiveness of traffic calming measures depends strongly on the class and importance of the street in question [1], personal traits, mood and perception of driver [2], frequency of the traffic calming treatments along the path of travel [3,[5][6][7] and, last but not least, landscaping [17].…”

Design and Construction Aspects of Concrete Block Paved Vertical Traffic-Calming Devices Located in Home Zone Areas

“…When planning traffic-calming schemes, different traffic-calming measures (horizontal and vertical deflections) [5,6,8,14,15,17] are taken into account and then the appropriate surfacing is specified [6,16]. It is important that apart from the effect of selected traffic-calming measures on traffic safety and speed reduction [2,9,11,12,20,21], traffic-calming measurement planning should also take into account their environmental and public health impacts [18,19,22,23]. Other studies covered various traffic-calming measures, such as speed humps, speed tables, chicanes, etc., and the influence of geospatial elements on the street surroundings was also analysed [24,25].…”

“…These include the number of lanes, whether a horizontal section is straight or curved, the number of intersections, traffic conditions, longitudinal grade and, of course, the expected type of traffic (only passenger cars, with the possible traffic of commercial and municipal vehicles or public transport vehicles). Most studies deal with vertical traffic-calming devices surfaced with asphalt layers and located on asphalt paved streets [7,11,12,22,23,32,33]. Previous research focused mainly on the effectiveness of vertical traffic-calming devices in reducing vehicular speed in various vertical traffic-calming device designs and speed configurations.…”

Analysis of vibration exposure of vehicles during passing through speed bumps

“…Loprencipe ve arkadaşları (2019) ise yükseltilmiş yaya geçitlerinin geometrik ve fonksiyonel özelliklerini incelemişlerdir. Buna göre tasarlanan ve uygulanan yükseltilmiş yaya geçitlerinin arasında ciddi farklar olduğunu tespit etmişlerdir [11]. Kırbaş ve Karaşahin (2018) hız tümseği ve hız platformlarındaki geçişin araç içi yolcu koltuğu üzerindeki titreşim etkilerini incelemişlerdir.…”