Radioactive Waste Evaporation: Current Methodologies Employed for the Development, Design and Operation of Waste Evaporators at the Savannah River Site and Hanford Waste Treatment Plant

Abstract

Evaporation of High Level and Low Activity (HLW & LAW) radioactive wastes for the purposes of radionuclide separation and volume reduction has been conducted at the Savannah River and Hanford Sites for more than forty years. Additionally, the Savannah River Site (SRS) has used evaporators in preparing HLW for immobilization into a borosilicate glass matrix. The Hanford River Protection Project (RPP) is in the process of building the world's largest radioactive waste treatment facility, Waste Treatment Plant (WTP), which will use evaporators to concentrate the liquid waste and plant recycles prior to immobilization into a borosilicate glass matrix. Radioactive waste is evaporated at each site using various evaporator designs (e.g., forced circulation, horizontal bent tube). While the equipment used to evaporate radioactive waste is relatively simple in design, the complexity in the evaporator processes in current service and in those currently in the design stages stems from the heterogeneous nature of the waste and the effects of seemingly minor components (e.g., Si) on the process.Aqueous electrolyte thermodynamic modeling and experiments have been conducted by the SRS Savannah River Technology Center (SRTC) in support of the SRS HLW and Defense Waste Processing Facility (DWPF) Evaporators and the Hanford RPP WTP. After 40 years of successful operation, accumulation of two solid phases (a nitrated aluminosilicate, Na 8 Al 6 Si 6 O 24 (NO 3 ) 2 •4H 2 O and sodium diuranate, Na 2 U 2 O 7 ) developed as an insoluble phase in the Savannah River Site (SRS) 2H evaporator in 1996. The aluminosilicate scale deposit caused the SRS 2-H evaporator to become completely inoperable by October 1999. Accumulation of the sodium diuranate phase on the aluminosilicate scale has caused criticality concerns. Modeling and experiments were conducted to develop a method to control the process chemistry in order to prevent the formation of aluminosilicate deposits in the future.The lessons learned from the development, design, and operation of the SRS waste treatment facilities and the currently operating 242-A Hanford HLW evaporators were applied by SRTC in support of the development and design of the Hanford WTP evaporators. Thermodynamic equilibrium modeling along with solubility and physical property experiments are being conducted to develop process control and flow sheet models. Additionally, lessons learned from the development of an advanced antifoam agent for the SRS vitrification process evaporators are being applied to the testing and development of an antifoam agent for the Hanford WTP evaporators. This paper will discuss the methodologies, results, and achievements of the SRTC evaporator development program that was conducted in support of the SRS and Hanford WTP evaporator processes. The "crosspollination" and application of waste treatment technologies and methods between the Savannah River and Hanford Sites will be highlighted. The "crosspollination" of technologies and methods is expected to benefit the Departm...

Flocculation improves uptake of 90Sr and 137Cs from radioactive effluents

“…Four main technical processes are available for treatment of liquid waste such as evaporation (Calloway, 2003;Patra et al, 1987), chemical precipitation (IAEA, 1981), solid phase separation (Lopez Cardozo et al, 1966;Galbraith and Asay, 1982), and ion exchange (Vaghela, 2000;Wei et al, 1999). Evaporation is a proven method providing good decontamination and sludge volume reduction (Grabener et al, 1990;Sinha et al, 1995).…”

“…Ion-exchange methods have extensive application in the treatment of liquid effluents at nuclear power plants (Kingery, 1990;Faghihian et al, 1997). The chemical precipitation methods based on the coagulation-flocculation separation principle are mostly used in nuclear power plants for the treatment of liquid effluents with low and intermediate activity, and high salt and mud content (IAEA, 1992).…”

Concentration of HLLW from Future SNF Recycling for Efficient Immobilization in a CCIM

“…These actinides, if recovered, are suitable for burn-up and energy recovery in fast reactors. 4. Separation additives and corrosion products from the various aqueous separation tanks and HLLW storage vessels were added to reflect compositions based on samples of HLLW from past defense and commercial SNF recovery operations.…”

A novel defoamer for processing nuclear waste: Testing and performance

“…The foam lamella stabilization mechanism by particles without a surfactant is quite different than the lamella stabilization with a surfactant. The foaminess during the boiling of a nuclear waste aqueous slurry containing both colloidal biphilic and hydrophilic nanoparticles is discussed elsewhere [8][9][10][11]22.…”