Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Abstract

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment.The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods.The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-to-ice radiation model using schematic dynamic heat flux calculations.The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is ii in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer.The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building.Overall, it is concluded that the interior re...

Numerical and experimental investigation of the influence of infrared reflective interior surfaces on building temperature distributions

“…Further description of the surface materials and the experimental method have been described. 5,17 Air and surface temperatures were measured at 14 positions totally according to Figure 1. Each test cabin was equipped with one PC-logger with the cold junction accuracy of AE0.5 C at 25 AE 10 C and the voltage accuracy of AE0.01%.…”

“…The density correlation was based on the incompressible ideal gas assumption. The RNG k-" constants used in this numerical calculation have been described 17 together with the corresponding equations. The meshed computational domain, including the building envelope with homogenous properties, as well as the indoor air volume was constructed using the ANSYS/Icepak (version 14.5).…”

Heat insulation effect in solar radiation of polyurethane powder coating nanocomposite

“…Joudi 14 studied the radiation properties of the surface, including the emissivity coefficient of interior surfaces, modeling methods, and its results on building energy performance and the thermal environment of buildings. This study indicated that surface with low emissivity can increase indoor air temperature vertical gradient, which is dependent on the time of day and outside weather conditions.…”