R134a condensation flow regime and pressure drop in horizontal microchannals cooled symmetrically and asymmetrically

Ji, Wang; Wang, Jin; Li, Jun Ming

doi:10.1016/j.ijheatmasstransfer.2017.08.003

Cited by 3 publications

(1 citation statement)

References 37 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Al-Zaidi et al (2018) carried out flow visualization of HFE-7100 in a 0.57 mm rectangular multi-microchannel. Wang et al (2017), Wang and Li (2018) studied two-phase flow regimes of R134a in 301.6 μm oval parallel microchannels. Nasrfard et al (2019) experimentally studied the condensation heat transfer of R141b in intermittent flow regime within a smooth horizontal tube.…”

Section: Introductionmentioning

confidence: 99%

Flow Regimes and Transitions for Two-Phase Flow of R152a During Condensation in a Circular Minichannel

2021

View full text Add to dashboard Cite

Two-phase flow regimes were experimentally investigated during the entire condensation process of refrigerant R152a in a circular glass minichannel. The inner and outer diameters of the test minichannel were 0.75 and 1.50 mm. The channel was 500 mm long to allow observation of all the two-phase flow regimes during the condensation process. The experiments used saturation temperatures from 30 to 50°C, a mass flux of 150 kg/(m2·s) and vapor qualities from 0 to 1. The annular, intermittent and bubbly flow regimes were observed for the experimental conditions in the study. The absence of the stratified flow regime shows that the gravitational effect is no longer dominant in the minichannel for these conditions. Vapor-liquid interfacial waves, liquid bridge formation and vapor core breakage were observed in the minichannel. Quantitative measurements of flow regime transition locations were carried out in the present study. The experiments also showed the effects of the saturation temperature and the cooling water mass flow rate on flow regime transitions. The results show that the annular flow range decreases and the intermittent and bubbly flow ranges change little with increasing saturation temperature. The cooling water mass flow rate ranging from 38.3 kg/h to 113.8 kg/h had little effect on the flow regime transitions.

show abstract