Quality Enhancement of Gamma Camera SPECT Images Via the Taguchi-Based Optimization of Their Minimum Detectable Difference And a V-Shaped Slit Gauge

Abstract

Background: This study optimized the minimum detectable difference (MDD) of gamma camera SPECT images via the Taguchi analysis and an indigenous V-shaped slit gauge. The latter was customized to satisfy the Taguchi analysis’ quantitative requirements. Methods: The slit gauge MDD quantification of derived SPECT images was based on a pair of overlapped-peak profiles obtained from a tangent slice of the V-shaped slit with two adjacent peaks. Using the revised Student’s t-test with a multiplied constant, 1.96, the MDD was defined as the minimum distance between two peak centers, which deviation was large enough to ensure a 95% confidence level of their separation. In total, eighteen combinations of six gamma camera scanned factors (A-F), namely (A) collimator, (B) detector to target distance, (C) total counts, (D) acquired energy width, (E) Matrix size, and (F) zoom of collected ROI with each of two or three levels were organized into 18 groups to collect the slit gauge images according to Taguchi L18 orthogonal array. Next, three well-trained radiologists ranked the scanned gauge images to derive the fish-bone-plot of signal-to-noise ratio (S/N, dB) and correlated ANOVA. Results: The quantified MDD was proposed to verify the optimal suggestion of gamma camera scanned protocol, and obtained the MDD as 8.44, 7.88, and 7.40 mm for the 2nd group of the original L18, conventional, and optimal presets, respectively. Conclusions: The optimal preset of gamma camera was achieved according to Taguchi analysis. The MDD-based approach was found more beneficial in evaluating the spatial resolution than the line pair/cm approach in routine quality control in this study.