Protection Coordination of Distribution Network with Optimally Placed Distribution Generation

Abstract

In this study, optimal distribution network protection coordination scheme with directional over current relays is developed. In addition, impact of optimally placed Distribution Generation (DG) on the protection coordination scheme is subsequently evaluated using relay Coordination Time Interval (CTI). As such, the study is carried out in two stages. In the first stage, optimal relays settings (time dial settings and pickup current) are determined. While in the second stage, the maximum DG penetration level with changes in the protection coordination is evaluated. Particle Swarm Optimization (PSO) algorithm, due to its faster convergence speed, is applied in both stages. The technique is implemented on the distribution section of the IEEE 14-bus and IEEE 30-bus systems and simulated in MATLAB. The simulation results obtained are compared with that obtained using hybrid Genetic Algorithm (GS) – Nonlinear Programming (NP) approach using relays pickup current and operating times as performance metrics. For the IEEE 14 bus system, the developed PSO-based relay coordination has reduced the relays pickup current and operating times by roughly 28% and 32% respectively compared with the hybrid GA-NLP technique. The optimal locations of the DGs are found to be bus 5, 8 and 12 which result in CTI of 0.233sec. While in the IEEE 30 bus system, the developed relay coordination has reduced the relays pickup current and operating times by roughly 31% and 34% respectively compared with the hybrid GA-NLP technique. Similarly, the optimal locations and sizes of the DGs are found to be bus 19, 26 and 30, which result in CTI of 0.462sec.

Impact of distributed power generation on protection coordination in distribution network

“…Results show that DG penetration levels are higher with less impact on protection coordination when PCI is higher at some locations. In [27], [28] the proposed approach is solved using the Particle Swarm Optimization algorithm PSO, due to its faster convergence speed, to determine the maximum penetration of inverter-based and synchronous-based DG taking into account the coordination of the protection of the directional overcurrent relays DOCRs.…”