Progress of CO₂ Dispersion Interferometer on EAST

Abstract

A CO2 Dispersion Interferometer (DI) system on the Experimental Advanced Superconducting Tokamak (EAST) was successfully operated, providing plasma electron density measurements. The DI system utilizes a continuous-wave 9.3 μm CO2 laser source to measure line-averaged electron densities. This offers significant advantages, including the ability to minimize fringe jumps and insensitivity to mechanical vibrations. These characteristics are well-suited for future high-density, long-pulse plasma discharges. The DI system provides a real-time density feedback signal to the plasma control system for routine density control during long-pulse operation. Experiments with EAST demonstrated good agreement between the density obtained by the DI system and the preset densities. The DI system also exhibited stability during long-pulse discharge. Moreover, the DI system was stable during rapid density changes and high-density pellet injections. In shot No. 120594, the DI system exhibited stable density feedback during continuous projectile injection lasting over 50 seconds; the line-averaged electron density is approximately 4×1019 m-3. In contrast to the long-wavelength source interferometer, which may deflect light from the detector owing to excessive refraction angles in larger density-gradient discharges, the DI ensured accurate density measurements. The DI system on EAST is dependable for accurately measuring the electron density.