Pretreatment for biorefineries: a review of common methods for efficient utilisation of lignocellulosic materials

Abstract

The implementation of biorefineries based on lignocellulosic materials as an alternative to fossil-based refineries calls for efficient methods for fractionation and recovery of the products. The focus for the biorefinery concept for utilisation of biomass has shifted, from design of more or less energy-driven biorefineries, to much more versatile facilities where chemicals and energy carriers can be produced. The sugar-based biorefinery platform requires pretreatment of lignocellulosic materials, which can be very recalcitrant, to improve further processing through enzymatic hydrolysis, and for other downstream unit operations. This review summarises the development in the field of pretreatment (and to some extent, of fractionation) of various lignocellulosic materials. The number of publications indicates that biomass pretreatment plays a very important role for the biorefinery concept to be realised in full scale. The traditional pretreatment methods, for example, steam pretreatment (explosion), organosolv and hydrothermal treatment are covered in the review. In addition, the rapidly increasing interest for chemical treatment employing ionic liquids and deep-eutectic solvents are discussed and reviewed. It can be concluded that the huge variation of lignocellulosic materials makes it difficult to find a general process design for a biorefinery. Therefore, it is difficult to define "the best pretreatment" method. In the end, this depends on the proposed application, and any recommendation of a suitable pretreatment method must be based on a thorough techno-economic evaluation.

Valorisation of Exhausted Olive Pomace by an Eco-Friendly Solvent Extraction Process of Natural Antioxidants

“…Lignocellulosic biomass is a renewable source of energy, biofuel and other valuable products that could contribute to reducing our intensive dependence on fossil fuels. The estimated global annual production of lignocellulosic biomass is around 1 × 10 11 tons [ 1 ]. This renewable biomass offers opportunities for replacing the current economic model based on petrol derivatives by a circular economic model based on renewable resources.…”

Engineering Robust Cellulases for Tailored Lignocellulosic Degradation Cocktails

“…These treatments reduce its recalcitrance by increasing biomass porosity, reducing cellulose crystallinity, and exposing the crystalline cellulose core to improve enzyme accessibility [47]. Treatment consists of several chemical, physicochemical, and biological procedures [48]. The aim is to break complex polymers into low molecular components.…”

Purity and structural composition of lignin isolated from Miscanthus x giganteus by sub-critical water extraction with associated modifiers

“…Because of autohydrolysis, the maximum extractability of the lignin was only achieved in a narrow range of reaction severity after the severe conditions of a long reaction time and high temperature, which consequently decreased the lignin reactivity, solubility, and overall delignification rate (Lehto et al, 2016). The lower delignification percentage for SE may also be caused by the repolymerisation of polysaccharides degradation products, such as furfural from hemicellulose formed during an increased severe pretreatment (Galbe and Wallberg, 2019). In addition, the polymerisation of the carbohydrate and lignin degradation products formed a lignin-like material, termed pseudo-lignin, particularly under high severity pretreatment conditions.…”