Preparation of Cationic Cellulose as a Natural Flocculant/Sorbent and Its Application in Three Water Treatment Scenarios

Abstract

In this study, cationic cellulose (CC) was prepared by etherifying commercial cellulose with (3-chloro-2 hydroxypropyl) trimethylammonium chloride (CHPTAC) in an alkaline medium. The prepared CC was characterized using Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and nuclear magnetic resonance (NMR). The characterization results affirmed the successful cationization of cellulose. Upon optimization of reaction conditions, a CC sample with a degree of substitution (DS) of 0.857 was achieved. The CC sample was then tested as a flocculant or sorbent in three environmental applications: algal harvesting, solid removal from dairy wastewater, and capture of methyl orange (MO) in dye wastewater. The effects of dose level and pH on flocculation/sorption performance were studied. Under the optimal dose level and pH conditions, up to 90.4% of dry algal biomass and 53.3% of suspended solids in the dairy wastewater were removed, as measured by standard jar testing. Around 64.2% of MO in the synthetic wastewater was sorbed on the prepared CC and removed, as determined by absorbance at 463 nm. The new CC preparation method exempts the pre-dissolution of cellulose in a solvent and is expected to promote the application of CC in water treatment and the alike scenarios.