Preparation and crystallization of Ti53Cu27Ni12Zr3Al7Si3B1 bulk metallic glass with wide supercooled liquid region

Glass-forming ability and mechanical properties of Ti-based bulk glassy alloys with large diameters of up to 1cm

“…So far, the highest glass-forming ability (GFA) was found in either noble metal Pd-based alloys or Zr-based alloys [6,7]. In recent years, much attention has been paid to explore Ti-based bulk glassy alloys due to their high specific strength and low density [8][9][10][11][12][13][14][15][16][17][18][19][20]. Development of Ti-based bulk glassy alloys is expected to significantly expand the application fields of bulk glassy alloys.…”

“…Development of Ti-based bulk glassy alloys is expected to significantly expand the application fields of bulk glassy alloys. To date, a number of Ti-based bulk glassforming alloys, such as Ti-Cu-Ni-(Sn or Sb) [8], Ti-Cu-Ni-Si-B [9,10], Ti-Zr-Ni-Cu-Sn [11], Ti-Cu-Ni-Zr-Al-Si-B [12], (Ti, Zr)-(Cu, Ni) [13] have been synthesized by the copper mold casting method. Ti-based bulk glassy alloys were considered for biomedical applications due to their unique mechanical properties (lower Young's moduli, higher hardness and larger elastic limitation) and good biocompatibility.…”

A new Ti–Zr–Hf–Cu–Ni–Si–Sn bulk amorphous alloy with high glass-forming ability

“…In recent years, much attention has been paid to explore Ti-based bulk amorphous alloys (BAAs) due to their high specific strength and low cost [1][2][3][4][5][6][7][8][9][10][11]. Development of Ti-based BAAs is expected to significantly expand the application fields of BAAs.…”

“…Development of Ti-based BAAs is expected to significantly expand the application fields of BAAs. To date, a number of Ti-based bulk glass-forming alloys, such as Ti-Cu-Ni-(Sn or Sb) [1], Ti-Cu-Ni-Si-B [2,3], Ti-Zr-Ni-Cu-Sn [4] and Ti-Cu-Ni-Zr-Al-Si-B [5], (Ti, Zr)-(Cu, Ni) [6] have been synthesized by the copper casting method. Indeed, the Ti-based amorphous alloys have already shown to form glassy rods with maximum diameters up to 6-14 mm [7][8][9].…”

Formation of Ca–P layer on the Ti-based bulk glassy alloy by chemical treatment

“…To date, a number of Ti-based bulk glassforming alloys, such as Ti-Cu-Ni-(Sn or Sb) [1], Ti-Cu-Ni-Si-B [2,3], Ti-Zr-Ni-Cu-Sn [4], Ti-Cu-Ni-Zr-Al-Si-B [5], (Ti, Zr)-(Cu, Ni) [6] have been synthesized by the copper mold casting method. However, most of the Ti-based bulk glassy alloys have lower GFA.…”