Predictive discrete‐time sliding mode based direct power control for grid‐connected energy conversion systems

Abstract

A method for digital direct power control design for grid‐connected energy conversion systems was proposed in this paper. The active and reactive powers are directly controlled with constant switching frequency by selecting an appropriate switching control sequence of voltage source converter as a key part of energy conversion systems. The control design combines a discrete‐time sliding mode control and predictive control. The selection of feasible switching control vectors is a direct result of the discrete‐time sliding mode control approach. These vectors satisfy the existence conditions of the sliding mode, but each of them induces system motion with different properties. The task of predictive control is to select an appropriate switching control sequence to reduce the chattering phenomenon, steady‐state error, and overshoot. The cost function of the prediction process is defined as the average value of both power errors on the prediction horizon of three sampling periods. Simulation results, experimental results, and results of a comparative analysis are presented in order to show the performance and effectiveness of the proposed control design.