Prediction of Dynamic Elastic Properties for Mishrif formation in West Qurna-1 oil field: an experimental work

Abstract

Shear and compressional wave velocities are useful for drilling operations, the exploration of reservoirs, stimulation processes, and hydraulic fracturing. An ultrasonic device will be used in this investigation to anticipate and analyze the elastic characteristics of carbonate rocks. At the summit of the field, the well WQ1-20 obtained samples of the Mishrif formation from a variety of various depths. The number of samples taken from the well is nine from different units whereas the number of samples taken from the main unit (MB2) was five. The relations between the elastic properties for the carbonate rocks with P-and S-waves were defined. The relations between Vp and Vs with elastic properties were defined by applied Regression analysis. The results showed that a linear relationship between P-and S-wave velocities with the elastic properties of the carbonate rocks. It is found that the relationship between Vp and Young's modulus (E) is R2 equal to 0.979 while the relationship between Vs and Young's modulus (E) is R2 equal to 0.925. The relationship between shear modulus and Vs is good in comparison with Vp where the values of R2 were 0.985 and 0.94 respectively. R2 values for the Bulk modulus and Lame's constant of Vp are 0.925 and 0.6, respectively, while the values for Vs are 0.925 and 0.6 for the latter. The relation between Vp/Vs ratio with Poisson’s ratio showed a good R2 with a value of 0.97. When it comes to predicting the dynamic elastic characteristics of a material, the ultrasonic approach may be regarded as a cost-effective, easy, and non-destructive method.