Warmauslagerungsfähige Aluminiumlegierungen bieten den Vorteil, dass sie in ihrer Festigkeit in einem sehr weiten Bereich gezielt eingestellt werden können. Dies setzt voraus, dass die Prozesstemperaturen und -zeiten der Warmauslagerung sehr genau eingehalten werden. Die hier vorgestellten Arbeiten zielen auf die Qualifizierung zerstörungsfreier Messmethoden ab, mit denen der Warmauslagerungszustand Prozessbegleitend sehr schnell ermittelt werden kann. Somit können bereits während der Durchführung der Warmauslagerung Fehler im Prozess detektiert werden und im Sinne der Qualitätssicherung eine Verbesserung der Kontrollmechanismen erzielt werden. Die Untersuchungen wurden mittels Leitfähigkeits-, Wirbelstrom-und Resonanz-Frequenz-Messungen durchgeführt. Insbesondere die Ergebnisse der Wirbelstrom-und Resonanz-FrequenzMessungen lassen das hohe Potenzial zerstörungsfrei arbeitender Verfahren zur online Kontrolle des Warmauslagerungszustandes erkennen.Schlüsselwörter: Strangpressen / Warmauslagern / Aluminium / zerstörungsfreie Prüfung / Heat treatable aluminium alloys offer the advantage that their strength can be specifically adjusted within a very broad range. This presupposes that the age-hardening's process temperatures and durations are very precisely maintained. The work presented here aims to qualify non-destructive testing methods with which the age-hardening condition can be very rapidly determined during the actual process.Thus, process defects can be readily detected during the age-hardening procedure and, within the scope of a quality assurance, an improvement of the control mechanisms can be obtained. The investigations were carried out by means of conductivity, eddycurrent and resonance-frequency measurements. The results of the eddy-current and resonancefrequency measurements in particular allow the enormous potential of non-destructive procedures to be realised for the online control of the age-hardening condition.