Power Flow Optimization Strategy of Distribution Network with Source and Load Storage Considering Period Clustering

Abstract

The large-scale grid connection of new energy will affect the optimization of power flow. In order to solve this problem, this paper proposes a power flow optimization strategy model of a distribution network with non-fixed weighting factors of source, load and storage. The objective function is the lowest cost, the smallest voltage deviation and the smallest power loss, and many constraints, such as power flow constraint, climbing constraint and energy storage operation constraint, are also considered. Firstly, the equivalent load curve is obtained by superimposing the output of wind and solar turbines with the initial load, and the best k value is obtained by the elbow rule. The k-means algorithm is used to cluster the equivalent load curve in different periods, and then the fuzzy comprehensive evaluation method is used to determine the weighting factor of the optimization model in each period. Then, the particle swarm optimization algorithm is used to solve the multi-objective power flow optimization model, and the optimal strategy and objective function values of each unit output in the operation period are obtained. Finally, IEEE33 is used as an example to verify the effectiveness of the proposed model through two cases: a fixed proportion method to determine the weighting factor, and this method to determine the weighting factor. The proposed method can improve the economy and reliability of distribution networks.

Voltage Control Strategy for Low-Voltage Distribution Network with Distributed Energy Storage Participating in Regulation under Low-Carbon Background

“…In PSO, multiple particles in the search space guide the updating of velocity and position according to global and individual optimality, and coevolution finds the optimal solution to the problem. The velocity updating formula is as follows [23]:…”

Prediction Analysis of Fault Mode Sets for High Permeability Distributed Energy Distribution Networks Based on Multivariate Data

“…It involves taking into account elements like the interoperability, dependability, and efficiency of the various sources in order to maximize energy output and reduce environmental impact. Lin, Z., and others [18] have talked about Reactive power adjustment for distribution network-connected electric vehicles entails controlling the charging rate of the vehicle in order to balance active and reactive power consumption while taking voltage limitations into account. To avoid power grid overloads and voltage instability, it makes sure that the distribution network maintains steady voltage levels during peak charging times.…”

“…Lin, Z., et, al. [18] 2023 Improved voltage stability and reduced power losses due to the efficient management of reactive power flow between the EV and the distribution network.…”

Explore actual sustainable energy topics by using Yake!, Krovetz, GSDMM and short text summaries

“…The paper [41] proposes a power flow optimization strategy model of a distribution network with non-fixed weighting factors of source, load and storage. The k-means algorithm is used to cluster the equivalent load curve in different periods, and then the fuzzy comprehensive evaluation method is used to determine the weighting factor of the optimization model in each period.…”