Porous Anion Exchange Membrane for Effective Acid Recovery by Diffusion Dialysis

Abstract

Diffusion dialysis (DD) employing anion exchange membranes (AEMs) presents an attractive opportunity for acid recovery from acidic wastewater. However, challenges exist to make highly acid permeable AEMs due to their low acid dialysis coefficient (Uacid). Here, a series of porous and highly acid permeable AEMs fabricated based on chloromethyl polyethersulfone (CMPES) porous membrane substrate with crosslinking and quaternization treatments is reported. Such porous AEMs show high Uacid because of the large free volume as well as the significantly reduced ion transport resistance relative to the dense AEMs. Compared with the commercial dense DF-120 AEM, our optimal porous AEM show simultaneous 466.7% higher Uacid and 75.7% higher acid/salt separation factor (Sacid/salt) when applied to acid recovery at the same condition. Further, considering the simple and efficient fabrication process as well as the low cost, our membranes show great prospects for practical acid recovery from industrial acidic wastewater.

Label-Free Optical Sensing and Medical Grade Resins: An Advanced Approach to Investigate Cell–Material Interaction and Biocompatibility

“…Ion-exchanged resins are present in the anion-exchange membrane (AEM) of the filter. They bind, sequestrate, and then remove target compounds from blood during dialysis treatment [ 4 , 5 , 6 ]. This kind of resin has ionizable groups that dissociate and undergo an ion exchange with the external solution, especially in an aqueous environment [ 7 ].…”

Auxiliary functional group diffusion dialysis membranes for acid recovery

“…When the thickness of the membrane is decreased, the mechanical properties of the membrane are dropped. Therefore, how to improve the IEC of the membrane while maintaining high separation efficiency is critical in preparing anion exchange membrane for DD 21–23 …”