Porosity Characteristics of Coal Seams and the Control Mechanisms of Coal Petrology in the Xishanyao Formation in the Western Part of the Southern Junggar Basin

Abstract

The porosity characteristics of coal seams serve as a pivotal factor in assessing the development potential of coalbed methane (CBM) resources, significantly influencing the adsorption and permeability capabilities of coal reservoirs, as well as the accumulation, entrapment, and preservation of CBM. In this study, we focused on the coal seams of the Xishanyao Formation in the western part of the southern Junggar Basin (NW China). By leveraging the complementarity of nuclear magnetic resonance (NMR), low-temperature liquid nitrogen experiments, and high-pressure mercury intrusion porosimetry (MIP) in spatial exploration range and precision, we conducted a comprehensive analysis to achieve a fine description of porosity characteristics. Furthermore, we explored the coal petrology factors controlling the pore characteristics of the Xishanyao Formation, aiming to provide geological evidence for the selection of favorable areas and the development potential evaluation of CBM in the study area. The results indicate the following: (1) The total pore volume of the coal samples is 6.318 × 10−3 cm3/g on average, and the micropore volume accounts for a relatively high proportion (averaging 44.17%), followed by the fine pores (averaging 39.41%). The average porosity is approximately 3.87%, indicating good gas storage and connectivity of the coal seams, albeit with some heterogeneity. The coal reservoir is dominated by micropores and fine pores with diameters less than 100 nm, and the pore structure is characterized by low pore volume and high pore area. (2) The pore structure is influenced by both the coalification degree and the coal maceral. Within the range of low coalification, porosity increases with the increase in coalification degree. Building upon this, an increase in the vitrinite content promotes the development of micropores and fine pores, while an increase in the inertinite content promotes the development of meso–macropores. The clay mineral content exhibits a negative correlation with the adsorption pore volume ratio and a positive correlation with the seepage pore volume ratio.