Polyol-modified layered double hydroxides with attenuated basicity for a truly reversible capture of CO2

Preparation and characterization of hydrophilic and antifouling poly(ether sulfone) ultrafiltration membranes modified with Zn–Al layered double hydroxides

“…The individual LDH platelet had a thin, platelike lamellar morphology and a hexagonal structure, with an average size of 0.5 lm; this was similar to results from other researchers. 20 The well-recognized single or few layers of LDH guarantees the dispersion of LDH in casting solutions.…”

“…19 LDH has attracted much attention because of its wide and useful applications in adsorption, 20 catalysis, 21 ion exchange, 22 and so forth. The two-dimensional nanoplates can be expressed by the following general formula:…”

Dendrimers: syntheses, toxicity, and applications toward catalysis, environmental sciences, and nanomedecine

“…[8][9][10][11][12][13][14][15][16][17] The intrinsic properties of the dendritic organic moiety 10,[18][19][20] are designed according to the targeted applications [21][22][23][24] or to confer specific features to the hybrid materials when supported on inorganic supports. [25][26][27][28][29][30][31][32][33][34] In the area including energy and green chemistry, recently, major advances have been made in this regard by synthesizing metalorgano-aluminosilicates through in-situ synthesis of metal nanoparticles within the entanglements of supported dendrimers. 35 The development of the new concept of "Truly Reversible Gas Capture" by clay-dendrimer based adsorbents that do not need thermal regeneration has particularly attracted attention.…”

“…35 The development of the new concept of "Truly Reversible Gas Capture" by clay-dendrimer based adsorbents that do not need thermal regeneration has particularly attracted attention. 26,27,[29][30][31]36 This concept has not been thoroughly examined until recently and opens new prospects for medical, agricultural, and industrial applications involving catalysis and adsorption.…”

Modelling of Batch Lactic Acid Fermentation in the Presence of Anionic Clay

“…For the synthesis of hydrotalcite-type anionic clay, coprecipitation method at low supersaturation and constant pH was selected, being the most frequently used method to prepare the anionic clays (25)(26)(27)(35)(36)(37)(38)(39). Solution A, consisting of 1 mol of Mg(NO 3 ) 2 ·6H 2 O and 0.2 mol of Al(NO 3 ) 3 ·9H 2 O dissolved in 700 mL of distilled water, and solution B, containing 3.5 mol of NaOH and 0.943 mol of Na 2 CO 3 in 1 L of distilled water, were prepared at 35 °C.…”