Polymer Inclusion Membranes with Strip Dispersion

Abstract

Abstract:The present work investigated the permeation of indium ions through a polymer inclusion membrane (PIM), prepared with cellulose triacetate (CTA) as the base polymer, tris(2-butoxyethyl) phosphate (TBEP) as the plasticizer and di-(2-ethylhexyl)phosphoric acid (D2EHPA) as the extractant. With 5 M HCl aqueous solution as the strip solution, we observed an initial indium permeability of 2.4 × 10 −4 m/min. However, the permeability decreases with time, dropping to about 3.4 × 10 −5 m/min after 200 min of operation. Evidence was obtained showing that hydrolysis of CTA occurred, causing a dramatic decrease in the feed pH (protons transported from strip to feed solutions) and a loss of extractant and plasticizer from the membrane, and then leading to the loss of indium permeability. To alleviate the problem of hydrolysis, we proposed an operation scheme called polymer inclusion membranes with strip dispersion: dispersing the strip solution in extractant-containing oil and then bringing the dispersion to contact with the polymer membrane. Since the strong acid was dispersed in oil, the membrane did not directly contact the strong acid at all times, and membrane hydrolysis was thus alleviated and the loss of indium permeability was effectively prevented. With the proposed scheme, a stable indium permeability of 2.5 × 10 −4 m/min was obtained during the whole time period of the permeation experiment.