Polymer-Cement Composites Glazing by Concentrated Solar Energy

Abstract

Macro defect free (MDF) cements are polymer-cement composites characterized by high biaxial flexural strength compared to traditional concrete, having as a drawback a low water resistance. Glazing these composite materials with an inorganic enamel containing TiO2 nano-particles has led to a high water-stable material with advanced photocatalytic properties. Classic glazing by thermal treatment of samples, at 1050 °C, requires energy consumption and long-time performing. The purpose of this paper is to test the use of solar radiation as a source of energy in the glazing process. A vertical axis solar furnace has been used, from PROMES-CNRS Solar Laboratory, Font-Romeu Odeillo, France, and it has been observed that a uniform appearance of the glaze coating has been achieved; it shows high scratch resistance, meaning a good hardness and adhesion to the substrate. The obtained film was also characterized by SEM, EDS and XRD, aiming to evidence the coat morphology, the TiO2 distribution and its crystallinity alteration, when compared to the samples obtained by classic thermal treatment. The conclusion of the paper is that using solar radiation in the MDF cement glazing process is a promising approach for obtaining multifunctional materials.

Indoor and Outdoor Performance Study of Metallic Zinc Particles in Black Paint to Improve Solar Absorption for Solar Still Application

“…Various techniques, such as membrane desalination [2][3][4] and dialysis [5,6] are used in the purification of water. One of the potential alternatives to produce fresh water and decrease the cost of distillation plants is the utilization of solar energy directly using flat collections of concentrated collectors [7]. Solar distillation is one technique to produce fresh water at a lower cost than the other possible seawater desalination processes [8,9].…”