Polylactide composites with waste cotton fibers: Thermal and mechanical properties

Abstract

Recently, agricultural by‐products, for instance, corn husks, oat husks, or cocoa shells, have gained attention as a source of cellulose fibers and fillers because they can save the land and other natural resources required to grow fiber crops. It has to be noted, however, that textile processing, for example, shearing, is also a source of waste fibers. Our study focuses on utilization of waste cotton fibers, amassed during shearing of textiles, as a filler for polylactide (PLA). PLA composites with 10–30 wt% of waste cotton fibers were prepared and their thermal and mechanical properties were studied. The composite with 30 wt% of fibers exhibited markedly higher storage and loss moduli as compared with neat PLA; at 25°C the storage moduli increased by 53% whereas the loss modulus increased by 76%. In addition, the yield strength was slightly improved, by 11% at 25°C. Although the composites were thermally less stable than neat PLA, their 5% weight loss temperature remained high, about 300°C. POLYM. COMPOS., 35:747–751, 2014. © 2013 Society of Plastics Engineers

Microbial Secretion of D-Lactate-Based Oligomers

“…Polylactides or polylactic acid (PLAs) are one of the major commercially available thermoplastics that are entirely derived from renewable carbohydrate rich-products, such as corn. , The production capacity of PLAs reached 195,000 tons in 2013, representing about 3.8% of the total production of biobased plastics (partially or 100% derived from renewable resources) . PLAs are compostable and biocompatible materials that have been extensively applied in the biomedical field , and which are being increasingly used in commodity applications, such as packaging , and textiles. , …”

“…5 PLAs are compostable and biocompatible materials that have been extensively applied in the biomedical field 6,7 and which are being increasingly used in commodity applications, such as packaging 8,9 and textiles. 10,11 The most common route for producing high molecular weight PLA is ring-opening polymerization (ROP) through the formation of the cyclic dimer (lactide) of lactic acid (LA). 3,12,13 The LA is produced by carbohydrate fermentation, and the purification of LA from culture medium is typically performed by calcium salt precipitation and subsequent acidification, which generates salt as a byproduct.…”

Manufacturing and properties of biobased thermoplastic composites from poly(lactid acid) and hazelnut shell wastes

“…The new generation of WPCs are called “green composites” or “biobased thermoplastic composites” and are characterized by the use of a biopolymer matrix together with a lignocellulosic filler from industrial wastes; these components allow obtaining fully biodegradable WPCs with high environmental efficiency . Although the typical lignocellulosic filler in WPCs is sawdust from the wood industry, the use of lignocellulosic wastes obtained from agroforest and food industry is increasing continuously.…”

Poly(lactic acid)‐based nanocomposites

“…However, the composites are thermally unstable. [100] Composites are normally used to reinforce polymers, but in the case of wood plastic composites (WPC), the polymers reinforce the wood and bind it together. WPC are commodity items used for the past 10 years.…”