Poly(Vinylidene Fluoride‐CO‐Hexafluoropropylene) (PVDF‐HFP) Incorporated Acetylene Black: Electrical, Optical, and Structural Studies

Abstract

The primary goal of this study is to synthesize a high‐conducting polymer electrolyte film. The PVDF‐HFP and NaSCN film are prepared which showed the highest conductivity at 30 wt% dopant of NaSCN in the Polymer PVDF‐HFP which is 1.24× 10−4 S cm−1. Therefore, here the base polymer is taken as PVDF‐HFP and NaSCN (30 wt%) and further Acetylene Black is added to check the variation in the conductivity of the polymer film. Solution casting technique is used to create solid polymer electrolyte films using poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) with salt sodium thiocyanate and Acetylene Black. Polarized optical microscopy (POM) is used to evaluate the morphology of the polymer film surface. Fourier transform infrared spectroscopy (FTIR) to check the presence of functional group is used, impedance spectroscopy is used for the measurement of the conductivity of the sample, linear sweep voltammetry for finding electrical stability window, and transference number measurements for concentration of charge carriers are done for the electrical studies of polymeric films. The 1 wt% Acetylene Black doped polymer electrolyte film is found to have the maximum ionic conductivity, which is 1.95 × 10−3 S cm−1. The solid polymer electrolyte film has an electrochemical stability window (ESW) of 4.8 V and tion value of 0.83.