Abstract:There are several chemicals for using as ultraviolet (UV) absorbers. Considering that titanium phosphate (TiP) not yet studied for this purpose, we intended to investigate its effect on poly(ethylene terephthalate) (PET). TiP was synthesized and intercalated with two types of long-chain amine, octadecylamine (OETiP) and ether-amine-O-(2-aminopropyl)-O′-(2-methoxyethyl)polypropylene glycol) (JETiP) being the intercalation assisted by ethylamine. Nanocomposites of PET/TiP (filled with 5 wt%) (PET-TiP, PET-OETiP,… Show more
“…Such kind of shift in the UV-Visspectrum is known as a blue shift. 21 Any change in the UV-Vis spectrum is related to electron transitions, so the shift observed with the addition of the silica nanoparticles could be explained by the fact that the electron structure of nanocomposites depends on the concentration of the filler.…”
The structure and optic properties of the transparent PP+SiO2 nanocomposites with a relatively high refractive index and enhanced luminescence properties were investigated. X-ray analysis, Fourier-transform infrared (FTIR), Visible-ultraviolet, and photoluminescence spectroscopic methods were used for investigation. The XRD analysis indicated that the fraction of the amorphous phase of the polycrystalline polymer decreases with the introduction of SiO2 nanoparticles. Even though SiO2 nanoparticle is amorphous itself, they play the role of the crystallinity centers in the polymer matrix, and the degree of crystallinity increases in polymer nanocomposites. According to UV-vis spectroscopic analysis that, with the increasing of the concentration of SiO2 nanoparticles distributed in the polymer matrix, the absorption intensity of the samples also increases. It was explained by the hyperchromic effect which is related to raising the optical density of the polymer by introducing the filler particles (SiO2). It was calculated bandgap energy and refractive index on the base of the UV spectra of samples. It has been found that at low concentrations of amorphous silica nanoparticles, the polymer nanocomposite retains its transparency despite having a relatively high refractive index (1.96). Furthermore, the photoluminescence (PL) spectrum of nanocomposites was investigated depending on filler concentration. It was clear that the intensity of the PL spectrums increases with the increase of the filler concentration that is explained by the raising of the luminescence centers in the nanocomposite material. These luminescence centers are oxygen-deficit centers in the spatial structure of the amorphous silica nanoparticles.
“…Such kind of shift in the UV-Visspectrum is known as a blue shift. 21 Any change in the UV-Vis spectrum is related to electron transitions, so the shift observed with the addition of the silica nanoparticles could be explained by the fact that the electron structure of nanocomposites depends on the concentration of the filler.…”
The structure and optic properties of the transparent PP+SiO2 nanocomposites with a relatively high refractive index and enhanced luminescence properties were investigated. X-ray analysis, Fourier-transform infrared (FTIR), Visible-ultraviolet, and photoluminescence spectroscopic methods were used for investigation. The XRD analysis indicated that the fraction of the amorphous phase of the polycrystalline polymer decreases with the introduction of SiO2 nanoparticles. Even though SiO2 nanoparticle is amorphous itself, they play the role of the crystallinity centers in the polymer matrix, and the degree of crystallinity increases in polymer nanocomposites. According to UV-vis spectroscopic analysis that, with the increasing of the concentration of SiO2 nanoparticles distributed in the polymer matrix, the absorption intensity of the samples also increases. It was explained by the hyperchromic effect which is related to raising the optical density of the polymer by introducing the filler particles (SiO2). It was calculated bandgap energy and refractive index on the base of the UV spectra of samples. It has been found that at low concentrations of amorphous silica nanoparticles, the polymer nanocomposite retains its transparency despite having a relatively high refractive index (1.96). Furthermore, the photoluminescence (PL) spectrum of nanocomposites was investigated depending on filler concentration. It was clear that the intensity of the PL spectrums increases with the increase of the filler concentration that is explained by the raising of the luminescence centers in the nanocomposite material. These luminescence centers are oxygen-deficit centers in the spatial structure of the amorphous silica nanoparticles.
“…Polyethylene terephthalate degradation is commonly undertaken using chemical method and mechanical method. 19,67–70 In Figure 1 the routes recycling of textile wastes has been illustrated from raw material to customer. It also illustrated the open loop and close loop recycling.Figure 1.The routes used for reuse and recycling of textile wastes.…”
Section: Pet Based Materials Recycling Processmentioning
Growing industrialization and population deposit huge amounts of waste materials into nature every day. Environmental pollution is the biggest threat to life on earth, and one of the major polluters of nature is the throwaway plastic bottles made from polyethylene terephthalate (PET), a harmful fossil fuel/petroleum-based material. This review focuses on the recent development of recycling techniques of PET waste and their potential applications including fiber production, nanofibrous membrane, air filtering materials, water filtering materials, reinforced concrete formation, energy harvesting etc. In addition, the two most promising methods for recycling: chemical recycling and mechanical recycling are discussed. The most appropriate technologies and waste disposal procedures are suggested for energy harvesting based on the socio-economic aspects of the problem. The recent progress of this topic has been discussed. The prospect of these recycled bottles has been mentioned at the end of the article.
“…This work is addressed to the objectives of 2030 Agenda released by United Nations concerning economic, social, and environmental sustainability. [14][15][16][17][18]…”
Regarding environmental preservation, the upcycling of plastics from petroleum source is a consistent alternative. This work intended to investigate melting extruded composites of post-consumer HDPE (rHDPE) filled with pristine zirconium phosphate (ZrP), aluminum hydroxide [Al(OH)3] and aluminum hydroxide modifying-zirconium phosphate [ZrPOct/Al(OH)3]. Physico-mechanical and flame retardancy were assessed. FTIR revealed that rHDPE brought some degree of oxidative degradation probably from its cleaning process and/or processing. By nuclear magnetic resonance at time domain, rHDPE showed three relaxation domains. Fillers induced the lowering of rHDPE relaxation time owing to polymer/filler by hydrogen bonds. Diffraction pattern of rHDPE/Al(OH)3 and rHDPE/ZrPOct/Al(OH)3 indicated better fillers’ dispersion. Fillers changed rHDPE crystallinity degree and thermal stability but rheologic properties were invariable. For all composites, elastic modulus increased (up to 17%) indicating stiffening. Yield strength did not change but stress and strain at break decreased. For the composites, SEM/EDS showed better dispersion and distribution of ZrP and ZrPOct/Al(OH)3 particles. It was assumed that ZrP and ZrPOct/Al(OH)3 greatly increased the flame retardancy. The work corroborates the importance of polymers’ upcycling, and it is in consonance with the objectives of 2030 Agenda released by United Nations.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
