Metallic nanoparticles of aluminum (Al), a nontoxic and earth-abundant element, are relevant to plasmonic and energetic applications. However, monodisperse Al nanoparticles are difficult to synthesize using all gas-phase approaches, especially in the 10 to 20 nm size range; yet, many applications require particles of this size due to their enhanced properties. Here, an inductive nonthermal plasma reactor fed with aluminum trichloride (AlCl 3 ) and Ar is used to synthesize single-crystal aluminum nanoparticles. The particles can be produced with or without hydrogen. Several reactor conditions such as AlCl 3 vapor concentration, flow rates, and power are found to strongly influence particle properties such as the oxide shell thickness, particle mono-dispersity, and particle size. Significant quantities of Ar relative to AlCl 3 , short residence times of 10 s of ms, and pressures in excess of 4.7 Torr are required to form Al particles with geometric mean sizes of 10-20 nm and geometric standard deviations as low as 1.3. While the Al nanoparticles are covered with 2-4 nm thick oxide shells, the best synthesis conditions yield particle sizes determined by electron microscopy that are comparable to crystallite sizes determined from x-ray diffraction.