Plasma sprayed metal supported YSZ/Ni–LSGM–LSCF ITSOFC with nanostructured anode

Electrochemical properties and durability of in-situ composite cathodes with SmBa0.5Sr0.5Co2O5+δ for metal supported solid oxide fuel cells

“…show not only advanced thermal resistance, good mechanical strength and improved sealing efficiency but also a relatively quick start up property when compared to those qualities of general SOFCs [9][10][11][12][13][14]. However, oxidation of the metal substrate, the NiCr-Fe material and the anode substrate comprised of MS-SOFCs can occur in the high temperature range fabrication condition [15,16], which indicates that all of fabrication processing has to be carried out under hydrogen or inert gas.…”

High performance metal-supported intermediate temperature solid oxide fuel cells fabricated by atmospheric plasma spraying

“…A specially designed multigas mixer is applied to mix these gases uniformly. Other details of experimental apparatus and typical plasma spraying parameters are given in other published papers [36,37]. Fig.…”

Novel Metal Substrates for High Power Metal‐supported Solid Oxide Fuel Cells

“…The schematically experimental set-up, typical atmospheric plasma spraying parameters and details on experimental apparatus can be found elsewhere [25][26][27].…”

“…The simplified equivalent circuit of lumped elements L lead , R e , R ap , R cp , C a , C c , W s , as shown in Figure 7(a), (b) and (c), is applied to analyze the measured AC impedance curves [25,27]. The fitting curves generated by this simplified equivalent circuit are also given in these figures.…”