Pioneering Slickline Deployed Through Tubing Gravel Pack in Malaysia; Successful Case Study and Lessons Learnt

Abstract

Formation sand production is a major concern in brown field operations, especially as the field depletes and water production commences. There are many methods to control sand production in primary well completion; however, it becomes more challenging in producers where no primary sand control is installed initially, and it starts producing sand later in the well life. Selecting the right method for remediating these wells has become a hot topic with both Operators and Service Providers alike striving to discover effective and economical solutions for their brown-field operations. Currently, the solutions for through-tubing sand control in existing producers are screen hang-offs, through-tubing gravel packing1 (TTGP) and chemical sand consolidation. Through-tubing sand screen (TTSS) hang-offs above the producing zone, is an inexpensive sand control method. Unfortunately, these installations are typically short lived, often requiring regular well interventions due to screen plugging or erosion, or sand clean-out operations to remove sand accumulated in the production tubing. Alternatively, TTGP is a robust method to control sand production; however, more equipment is required to deploy the gravel pack which subsequently increases costs significantly in offshore applications. To simplify TTGP and make it economical, a major Interventions Service Provider devised a methodology to install TTGPs utilizing Slickine that reduces the overall installation cost tremendously. The methodology has been proven a great success in the US Gulf of Mexico where over 1,200 applications have been installed. The pilot implementation of slickline deployed through-tubing gravel pack (SL-TTGP) was executed in three S-Field wells in late 2018 which were shut-in due to higher than permissible sand production. These were challenging intervals in that they were uphole recompletions between cement packers in dual string 9-5/8" casing which had produced sand. The results from the installation proved that the methodology provides effective sand control and enables reinstatement of production from these wells. Further, the installations were achieved with lesser resources and at lower costs; less than half that of a CTU deployed TTGP. This success has led to further installations in the following year. This paper presents in detail the case study of the pilot implementation of SL-TTGP, key successes, as well as critical lessons learnt during execution and production phase. It includes the challenges, risks and their recommended mitigation plans, as well as the well performance comparison before and after the implementation both in terms of production and sand count.