Physicochemical, Mineralogy, and Thermo-Kinetic Characterisation of Newly Discovered Nigerian Coals under Pyrolysis and Combustion Conditions

Abstract

In this study, the physicochemical, microstructural, mineralogical, thermal, and kinetic properties of three (3) newly discovered coals from Akunza (AKZ), Ome (OME), and Shiga (SHG) in Nigeria were examined for potential energy recovery. Physicochemical analysis revealed high combustible but low levels of polluting elements. The higher heating values (HHV) ranged from 18.65 MJ/kg (AKZ) to 26.59 MJ/kg (SHG). Microstructure and mineralogical analyses revealed particles with a rough texture, surfaces, and glassy lustre, which could be ascribed to metals, quartz, and kaolinite minerals. The major elements (C, O, Si, and Al), along with minor elements (Ca, Cu, Fe, K, Mg, S, and Ti) detected are associated with clays, salts, or the porphyrin constituents of coal. Thermal analysis showed mass loss (ML) ranges from 30.51% – 87.57% and residual mass (RM) from 12.44% – 69.49% under combustion (oxidative) and pyrolysis (non-oxidative) TGA conditions due to thermal degradation of organic matter, vitrinite, inertinite and liptinite macerals. Kinetic analysis revealed that the coal samples are highly reactive under the non-isothermal oxidative and non-oxidative conditions based on the Coats-Redfern Model. The activation energy (Ea) ranged from 23.81 kJ/mol – 89.56 kJ/mol whereas the pre-exponential factor (ko) ranged from 6.77×10 -04 min -1 – 1.72×10 03 min -1 under pyrolysis and combustion conditions. In conclusion, the coals are practical feedstocks for either industrial applications or energy recovery.